Do not only show the space, but also the model. For instance both RGB
and HSV can have the same profiles.
As for LCH, we must not show any space (it is based on CIELAB).
Note that I use the string "Model: %s" which is already used in
libgimpcolor, so I am not breaking string freeze. The "%s - %s" string
though is not localized, even though ideally it should be (and possibly
even be a better joining string in English), but I don't want to break
string freeze for this.
This issue is part of the fix for #10998, more as a UX issue than a bug
per-se. Depending on how you were selecting a color, now you might
select it as HSV, LCh or some other model (this was **not** the case
before, even though the GUI was similar. Yet the stored color was always
RGB. Now it's actually "whatever you choose"). As a consequence, it is
possible that choosing a color in another model may convert to slightly
different numbers, especially within decimal places. I don't think it
was the main issue, but it certainly doesn't help. Now we may be making
clearer what color model is being used in the GimpColorSelect color
areas.
gimp_size_entry_eevl_unit_resolver () loops through all valid units
to find a match for user's inputted value in GimpSizeEntry.
It runs until gimp_unit_get_by_id () returns NULL, where it does a
final check on GIMP_UNIT_PERCENT.
Due to a small logic error, we kept setting the GimpUnit to
gimp_unit_percent () each time it was NULL, so the loop ran forever.
Per Jehan, this patch breaks the logic up so that we terminate the
loop once the percent check fails.
As Cheesequake noted in !1673, there may be cases where one would want
to run gimp_help_connect() while also setting a tooltip. So they also
run gimp_help_set_help_data(), even though the latter is implied by the
former. Worse, it makes the order matter too much because if you call
gimp_help_connect() after gimp_help_set_help_data(), the tooltip would
be removed.
Now the reason is that gimp_help_connect() was clearly made to be run on
windows whereas gimp_help_set_help_data() was for other widgets, which
usually don't need to react to F1. Yet the previous commit does add
F1-connect for the lock buttons, which kind of makes sense. So why not
just add this tooltip argument.
As a side fix, I am removing a bunch of gimp_help_connect() on each
button in the layers effect popover. Just run it once on the top
container.
This patch resizes the selection mode
icons based on the user's icon size
settings. It creates a new function in
gimpenumwidgets.c to update sizes,
then connects to GimpGuiConfig's icon
size update notifications in GimpSelectionOptions.
Rather than trying to implement full i18n plural support, we just remove
this failed attempt from the past. The fact is that to get proper
support, we'd basically need to reimplement a Gettext-like plural
definition syntax within our API, then ask people to write down this
plural definition for their language, then to write every plural form…
all this for custom units which only them will ever see!
Moreover code investigation shows that the singular form was simply
never used, and the plural form was always used (whatever the actual
unit value displayed).
As for the "identifier", this was a text which was never shown anywhere
(except in the unit editor) and for all built-in units, as well as
default unitrc units, it was equivalent to the English plural value.
So we now just have a unique name which is the "long label" to be used
everywhere in the GUI, and abbreviation will be basically the "short
label". That's it. No useless (or worse, not actually usable because it
was not generic internationalization) values anymore!
Per Jehan, we should remove gimppickbutton-default.[ch] and
move the functions into gimppickbutton.c. Then we can
make the GimpPickButtonPrivate API actually private without
any additional public functions.
Temporarily reverting as the private struct
is shared between various OS versions of
the object and needs to be accessible.
A different approach will be needed to resolve,
and until then, I'd like the Debian pipeline to
work properly.
This fixes all our GObject Introspection issues with GimpUnit which was
both an enum and an int-derived type of user-defined units *completing*
the enum values. GIR clearly didn't like this!
Now GimpUnit is a proper class and units are unique objects, allowing to
compare them with an identity test (i.e. `unit == gimp_unit_pixel ()`
tells us if unit is the pixel unit or not), which makes it easy to use,
just like with int, yet adding also methods, making for nicer
introspected API.
As an aside, this also fixes#10738, by having all the built-in units
retrievable even if libgimpbase had not been properly initialized with
gimp_base_init().
I haven't checked in details how GIR works to introspect, but it looks
like it loads the library to inspect and runs functions, hence
triggering some CRITICALS because virtual methods (supposed to be
initialized with gimp_base_init() run by libgimp) are not set. This new
code won't trigger any critical because the vtable method are now not
necessary, at least for all built-in units.
Note that GimpUnit is still in libgimpbase. It could have been moved to
libgimp in order to avoid any virtual method table (since we need to
keep core and libgimp side's units in sync, PDB is required), but too
many libgimpwidgets widgets were already using GimpUnit. And technically
most of GimpUnit logic doesn't require PDB (only the creation/sync
part). This is one of the reasons why user-created GimpUnit list is
handled and stored differently from other types of objects.
Globally this simplifies the code a lot too and we don't need separate
implementations of various utils for core and libgimp, which means less
prone to errors.
Currently if your image history includes an
image with a long name, the Welcome
Dialog will stretch out to match its width.
If the color profile name is long, then the
color scales will also stretch out due to
the profile label.
This patch adds ellipses to the Welcome
Dialog and a scrollwindow to the
ColorScales to prevent this.
The visibility lock icon and help ID was accidentally
left off the PathsTreeView set-up.
The Path Attributes also used the wrong icon to indicate
the paths were locked (compared to the one shown in the
Path Attributes dialogue).
Refactor: extract method gimp_widget_free_native_handle.
This reduces duplication of code and encapsulates Wayland specific code.
Call the new function in more places.
This is expected to fix#11613 but it is hard to be sure
since the exact sequence of events in 11613 was never determined
and only reproduceable in some flatpak builds.
Calling the new function in more places also should eliminate leaks.
But I did not test there was a leak prior to this fix.
In GimpColorSelector setter, don't change the model if perceptually same.
More than just don't emit changed, don't change the model value.
Also, fix leak by freeing old color.
Currently when you open the Procedure Browser, part of the
description text is off-screen.
This patch changes the values for the GtkPaned panels so that
the description is completely visible horizontally. It also makes
the vertical scrollbar conditional on the widget height rather
than always showing.
Ports the animation code started in e13cc635
to an independent gimp_widget_animation_enabled()
function. This allows plug-in authors to
also conditionally turn off animations if
the user's system settings say to do so.
The function is applied to the About
Dialogue animation as well as two Easter
Egg animations:
* Wilber's eyes blinking after 23 minutes
on an empty canvas
* Wilber's eyes following the mouse after
a certain sequence of tools is clicked
This new function allows to set a title with mnemonic.
But also it properly sets the frame label as the mnemonic widget for the
radio buttons, otherwise the mnemonic is mostly bogus and doesn't
actually give focus to the editable widgets (i.e. the radio group).
This includes a new function gimp_prop_choice_radio_frame_new() which
creates GimpIntRadioFrame from GimpChoice properties.
GimpChoice GimpProcedure arguments are still creating a combo box by
default, but it is now possible to override this default behavior to get
a radio frame by calling first:
```C
gimp_procedure_dialog_get_widget (dialog, "arg-name", GIMP_TYPE_INT_RADIO_FRAME);
```
There's no seemingly good reason for it not to be introspected, so let's
add it to the files. This also fixes an issue where the documentation
for it is not properly generated.
Some minor code style issues remained
that I missed in 8adcc0cd.
After further reflection, I also converted
the code to be a private/internal function.
gimp_prop_check_button_new () should
cover the majority of GtkCheckButtons,
and the function is currently only used
to fix the size of those widgets. We could
revisit it as a public function in the
future if more use cases are found.
Resolves#10026
Selecting a checkbutton makes the label bold. This increases the
width of its label, and if it's the longest item in a box, this
causes minor "twitching" and resizing of the dialogue.
This patch calculates the size of the label when bold and then
requests the label width be set accordingly to resolve the issue.
Per Pippin, the only color model that can
have double precision is RGB/A.
Therefore, we need to switch all others to
use float instead. This patch converts the
HSV and HSVA double babl formats.
- gimp_rgb_list_names() ported as gimp_color_list_names() using NUL-terminated
GimpColorArray.
- GimpColorHexEntry uses the new function (and is therefore now GimpRGB free!).
- gimp_rgb_parse_name() deleted as it's unused since my previous commit.
With all this, gimprgb-parse.c is now deleted from the repository! \o/
New functions with the same name as these functions are created, except without
the length argument (i.e. it's equivalent to calling these with -1).
The reason for this is that using strings with a length variant which may be
negative to switch to NUL-terminated strings are not bindable. At least in our
case, when testing in Python, the input string ended up as corrupted garbage and
GObject Introspection docs warns about such interfaces:
> In particular, avoid functions taking a const char * with a signed length that
> can be set to a negative value to let the function compute the string length
> in bytes. These functions are hard to bind, and require manual overrides.
(see: https://gi.readthedocs.io/en/latest/writingbindableapis.html#strings)
So instead, I create a simple version which runs on NUL-terminated strings only
and which is bound, whereas unbinding the generic length-version (making it
C-only, or maybe usable in some other bindings which ignore the (skip)
annotation; apparently some do this).
This is meant to obsolete GeglParamColor with at least an additional argument
has_alpha which we need in GIMP. It allows to advertize when a parameter wants
an opaque color, which in particular means we know when displaying a GUI to pick
colors with alpha or not.
For certain min/max values of the LabelSpin widget, in combination with
zero digits, it proves impossible to change the initial value.
The reason for this is that the step size may become less than 1.0.
In which case, stepping doesn't work because the number of digits is
set to zero.
Let's check for this situation and when digits is zero set the step
to 1.0 and make sure that page is at least the same value.
While testing this I also noticed another issue: when initializing
the upper value was set to 0.0 and the lower to 1.0 which leads to
a critical because lower > upper.
We fix this by switching the initial upper and lower values.
Build for macOS on CI breaks with:
> ../gimp3-2.99.19/libgimpwidgets/gimppickbutton-quartz.c:210:45: error: use of undeclared identifier 'monitor_profile'
> space = gimp_color_profile_get_space (monitor_profile,
Resolves#11246
On Windows, a CRITICAL was being repeatedly thrown if you
didn't have a monitor profile set. This is because we were trying to
pass a NULL value to g_utf16_to_utf8 () whenever we needed to
convert a GeglColor.
This patch fixes it by checking if the monitor profile filename is NULL
before trying to convert it.
