procyberian/gimp
2
0
Fork 0
mirror of https://gitlab.gnome.org/GNOME/gimp.git synced 2025-07-04 01:43:24 +00:00
Code Issues 1 Projects 1 Releases Packages Wiki Activity Actions
gimp/libgimp/gimpgpcompat.c

722 lines
22 KiB
C
Raw Normal View History

app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
/* LIBGIMP - The GIMP Library
* Copyright (C) 1995-2003 Peter Mattis and Spencer Kimball
*
app, libgimp: add copyright notices to the new stuff, minor cleanup
2019-07-31 00:12:36 +02:00
* gimpgpcompat.c
* Copyright (C) 2019 Michael Natterer <mitch@gimp.org>
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
*
* This library is free software: you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 3 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library. If not, see
* <https://www.gnu.org/licenses/>.
*/
#include "config.h"
#include "gimp.h"
libgimp: remove useless includes
2019-08-03 17:11:30 +02:00
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
#include "gimpgpcompat.h"
app, libgimp, libgimpbase: big plug-in API refactoring part three - libgimpbase: change GPParam to transfer all information about the GValues we use, in the same way done for GPParamDef. GPParam is now different from GimpParam from libgimp, pointers can't be casted any longer. The protocol is now completely GimpPDBArgType-free. Remove gp_params_destroy() from the public API. - libgimp: add API to convert between an array of GPParams and GimpValueArray, the latter is now the new official API for dealing with procedure arguments and return values, GimpParam is cruft (the wire now talks with GimpPlugIn more directly than with the members of GimpPlugInInfo, which need additional compat conversions). - libgimp, app: rename gimpgpparamspecs.[ch] to simply gimpgpparams.[ch] which is also more accurate because they now contain GValue functions too. The code that used to live in app/plug-in/plug-in-params.h is now completely in libgimp. - app: contains no protocol compat code any longer, the only place that uses GimpPDBArgType is the PDB query procedure implementation, which also needs to change. - app: change some forgotten int32 run-modes to enums.
2019-07-29 01:56:58 +02:00
/* local function prototypes */
static gchar * _gimp_pdb_arg_type_to_string (GimpPDBArgType type);
/* public functions */
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
GParamSpec *
_gimp_gp_compat_param_spec (GimpPDBArgType arg_type,
const gchar *name,
const gchar *nick,
const gchar *blurb)
{
GParamSpec *pspec = NULL;
g_return_val_if_fail (name != NULL, NULL);
switch (arg_type)
{
case GIMP_PDB_INT32:
Remove GIMP_TYPE_INT32 and GimpParamSpecInt32 Use gint and GParamSpecInt instead.
2019-08-15 14:04:56 +02:00
pspec = g_param_spec_int (name, nick, blurb,
G_MININT32, G_MAXINT32, 0,
G_PARAM_READWRITE);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
break;
case GIMP_PDB_INT16:
Remove GIMP_TYPE_INT16 and GimpParamSpecInt16 Use gint and GParamSpecInt with the right value range instead.
2019-08-15 14:17:17 +02:00
pspec = g_param_spec_int (name, nick, blurb,
G_MININT16, G_MAXINT16, 0,
G_PARAM_READWRITE);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
break;
case GIMP_PDB_INT8:
Remove GIMP_TYPE_INT8 and GimpParamSpecInt8 Use guchar and GParamSpecUChar instead.
2019-08-15 13:34:11 +02:00
pspec = g_param_spec_uchar (name, nick, blurb,
0, G_MAXUINT8, 0,
G_PARAM_READWRITE);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
break;
case GIMP_PDB_FLOAT:
pspec = g_param_spec_double (name, nick, blurb,
-G_MAXDOUBLE, G_MAXDOUBLE, 0.0,
G_PARAM_READWRITE);
break;
case GIMP_PDB_STRING:
Move GimpParamSpecString from libgimp back to app It's just too weird to be public. Remove its properties from the wire protocol and from pluginrc. Instead, have all GParamSpecs' flags on the wire and in pluginrc, so we can use stuff like GIMP_PARAM_NO_VALIDATE. Port the remaining few places to GIMP_PROC_ARG_STRING(). I'm sure something is broken now wrt UTF-8 validation, will add tighter checks in the next commit.
2019-08-19 12:54:52 +02:00
pspec = g_param_spec_string (name, nick, blurb,
NULL,
G_PARAM_READWRITE);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
break;
case GIMP_PDB_INT32ARRAY:
pspec = gimp_param_spec_int32_array (name, nick, blurb,
G_PARAM_READWRITE);
break;
case GIMP_PDB_INT16ARRAY:
pspec = gimp_param_spec_int16_array (name, nick, blurb,
G_PARAM_READWRITE);
break;
case GIMP_PDB_INT8ARRAY:
Rename GIMP_TYPE_INT8_ARRAY to GIMP_TYPE_UINT8_ARRAY and GimpParamSpecInt8Array to GimpParamSpecUInt8Array
2019-08-15 15:04:34 +02:00
pspec = gimp_param_spec_uint8_array (name, nick, blurb,
G_PARAM_READWRITE);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
break;
case GIMP_PDB_FLOATARRAY:
pspec = gimp_param_spec_float_array (name, nick, blurb,
G_PARAM_READWRITE);
break;
case GIMP_PDB_STRINGARRAY:
pspec = gimp_param_spec_string_array (name, nick, blurb,
G_PARAM_READWRITE);
break;
case GIMP_PDB_COLOR:
pspec = gimp_param_spec_rgb (name, nick, blurb,
TRUE, NULL,
G_PARAM_READWRITE);
break;
case GIMP_PDB_ITEM:
app, libgimp: get rid of all ID GTypes and ID param specs Turn all ID param specs into object param specs (e.g. GimpParamImageID becomes GimpParamImage) and convert between IDs and objects in gimpgpparams.c directly above the the wire protocol, so all of app/, libgimp/ and plug-ins/ can deal directly with objects down to the lowest level and not care about IDs. Use the actual object param specs for procedure arguments and return values again instead of a plain g_param_spec_object() and bring back the none_ok parameter. This implies changing the PDB type checking functions to work on pure integers instead of IDs (one can't check whether object creation is possible if performing that check requires the object to already exist). For example gimp_foo_is_valid() becomes gimp_foo_id_is_valid() and is not involved in automatic object creation magic at the protocol level. Added wrappers which still say gimp_foo_is_valid() and take the respective objects. Adapted all code, and it all becomes nicer and less convoluted, even the generated PDB wrappers in app/ and libgimp/.
2019-08-29 11:25:35 +02:00
pspec = gimp_param_spec_item (name, nick, blurb,
TRUE,
G_PARAM_READWRITE);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
break;
case GIMP_PDB_DISPLAY:
app, libgimp: get rid of all ID GTypes and ID param specs Turn all ID param specs into object param specs (e.g. GimpParamImageID becomes GimpParamImage) and convert between IDs and objects in gimpgpparams.c directly above the the wire protocol, so all of app/, libgimp/ and plug-ins/ can deal directly with objects down to the lowest level and not care about IDs. Use the actual object param specs for procedure arguments and return values again instead of a plain g_param_spec_object() and bring back the none_ok parameter. This implies changing the PDB type checking functions to work on pure integers instead of IDs (one can't check whether object creation is possible if performing that check requires the object to already exist). For example gimp_foo_is_valid() becomes gimp_foo_id_is_valid() and is not involved in automatic object creation magic at the protocol level. Added wrappers which still say gimp_foo_is_valid() and take the respective objects. Adapted all code, and it all becomes nicer and less convoluted, even the generated PDB wrappers in app/ and libgimp/.
2019-08-29 11:25:35 +02:00
pspec = gimp_param_spec_display (name, nick, blurb,
TRUE,
G_PARAM_READWRITE);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
break;
case GIMP_PDB_IMAGE:
app, libgimp: get rid of all ID GTypes and ID param specs Turn all ID param specs into object param specs (e.g. GimpParamImageID becomes GimpParamImage) and convert between IDs and objects in gimpgpparams.c directly above the the wire protocol, so all of app/, libgimp/ and plug-ins/ can deal directly with objects down to the lowest level and not care about IDs. Use the actual object param specs for procedure arguments and return values again instead of a plain g_param_spec_object() and bring back the none_ok parameter. This implies changing the PDB type checking functions to work on pure integers instead of IDs (one can't check whether object creation is possible if performing that check requires the object to already exist). For example gimp_foo_is_valid() becomes gimp_foo_id_is_valid() and is not involved in automatic object creation magic at the protocol level. Added wrappers which still say gimp_foo_is_valid() and take the respective objects. Adapted all code, and it all becomes nicer and less convoluted, even the generated PDB wrappers in app/ and libgimp/.
2019-08-29 11:25:35 +02:00
pspec = gimp_param_spec_image (name, nick, blurb,
TRUE,
G_PARAM_READWRITE);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
break;
case GIMP_PDB_LAYER:
app, libgimp: get rid of all ID GTypes and ID param specs Turn all ID param specs into object param specs (e.g. GimpParamImageID becomes GimpParamImage) and convert between IDs and objects in gimpgpparams.c directly above the the wire protocol, so all of app/, libgimp/ and plug-ins/ can deal directly with objects down to the lowest level and not care about IDs. Use the actual object param specs for procedure arguments and return values again instead of a plain g_param_spec_object() and bring back the none_ok parameter. This implies changing the PDB type checking functions to work on pure integers instead of IDs (one can't check whether object creation is possible if performing that check requires the object to already exist). For example gimp_foo_is_valid() becomes gimp_foo_id_is_valid() and is not involved in automatic object creation magic at the protocol level. Added wrappers which still say gimp_foo_is_valid() and take the respective objects. Adapted all code, and it all becomes nicer and less convoluted, even the generated PDB wrappers in app/ and libgimp/.
2019-08-29 11:25:35 +02:00
pspec = gimp_param_spec_layer (name, nick, blurb,
TRUE,
G_PARAM_READWRITE);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
break;
case GIMP_PDB_CHANNEL:
app, libgimp: get rid of all ID GTypes and ID param specs Turn all ID param specs into object param specs (e.g. GimpParamImageID becomes GimpParamImage) and convert between IDs and objects in gimpgpparams.c directly above the the wire protocol, so all of app/, libgimp/ and plug-ins/ can deal directly with objects down to the lowest level and not care about IDs. Use the actual object param specs for procedure arguments and return values again instead of a plain g_param_spec_object() and bring back the none_ok parameter. This implies changing the PDB type checking functions to work on pure integers instead of IDs (one can't check whether object creation is possible if performing that check requires the object to already exist). For example gimp_foo_is_valid() becomes gimp_foo_id_is_valid() and is not involved in automatic object creation magic at the protocol level. Added wrappers which still say gimp_foo_is_valid() and take the respective objects. Adapted all code, and it all becomes nicer and less convoluted, even the generated PDB wrappers in app/ and libgimp/.
2019-08-29 11:25:35 +02:00
pspec = gimp_param_spec_channel (name, nick, blurb,
TRUE,
G_PARAM_READWRITE);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
break;
case GIMP_PDB_DRAWABLE:
app, libgimp: get rid of all ID GTypes and ID param specs Turn all ID param specs into object param specs (e.g. GimpParamImageID becomes GimpParamImage) and convert between IDs and objects in gimpgpparams.c directly above the the wire protocol, so all of app/, libgimp/ and plug-ins/ can deal directly with objects down to the lowest level and not care about IDs. Use the actual object param specs for procedure arguments and return values again instead of a plain g_param_spec_object() and bring back the none_ok parameter. This implies changing the PDB type checking functions to work on pure integers instead of IDs (one can't check whether object creation is possible if performing that check requires the object to already exist). For example gimp_foo_is_valid() becomes gimp_foo_id_is_valid() and is not involved in automatic object creation magic at the protocol level. Added wrappers which still say gimp_foo_is_valid() and take the respective objects. Adapted all code, and it all becomes nicer and less convoluted, even the generated PDB wrappers in app/ and libgimp/.
2019-08-29 11:25:35 +02:00
pspec = gimp_param_spec_drawable (name, nick, blurb,
TRUE,
G_PARAM_READWRITE);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
break;
case GIMP_PDB_SELECTION:
app, libgimp: get rid of all ID GTypes and ID param specs Turn all ID param specs into object param specs (e.g. GimpParamImageID becomes GimpParamImage) and convert between IDs and objects in gimpgpparams.c directly above the the wire protocol, so all of app/, libgimp/ and plug-ins/ can deal directly with objects down to the lowest level and not care about IDs. Use the actual object param specs for procedure arguments and return values again instead of a plain g_param_spec_object() and bring back the none_ok parameter. This implies changing the PDB type checking functions to work on pure integers instead of IDs (one can't check whether object creation is possible if performing that check requires the object to already exist). For example gimp_foo_is_valid() becomes gimp_foo_id_is_valid() and is not involved in automatic object creation magic at the protocol level. Added wrappers which still say gimp_foo_is_valid() and take the respective objects. Adapted all code, and it all becomes nicer and less convoluted, even the generated PDB wrappers in app/ and libgimp/.
2019-08-29 11:25:35 +02:00
pspec = gimp_param_spec_selection (name, nick, blurb,
TRUE,
G_PARAM_READWRITE);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
break;
case GIMP_PDB_COLORARRAY:
pspec = gimp_param_spec_rgb_array (name, nick, blurb,
G_PARAM_READWRITE);
break;
case GIMP_PDB_VECTORS:
app, libgimp: get rid of all ID GTypes and ID param specs Turn all ID param specs into object param specs (e.g. GimpParamImageID becomes GimpParamImage) and convert between IDs and objects in gimpgpparams.c directly above the the wire protocol, so all of app/, libgimp/ and plug-ins/ can deal directly with objects down to the lowest level and not care about IDs. Use the actual object param specs for procedure arguments and return values again instead of a plain g_param_spec_object() and bring back the none_ok parameter. This implies changing the PDB type checking functions to work on pure integers instead of IDs (one can't check whether object creation is possible if performing that check requires the object to already exist). For example gimp_foo_is_valid() becomes gimp_foo_id_is_valid() and is not involved in automatic object creation magic at the protocol level. Added wrappers which still say gimp_foo_is_valid() and take the respective objects. Adapted all code, and it all becomes nicer and less convoluted, even the generated PDB wrappers in app/ and libgimp/.
2019-08-29 11:25:35 +02:00
pspec = gimp_param_spec_vectors (name, nick, blurb,
TRUE,
G_PARAM_READWRITE);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
break;
case GIMP_PDB_PARASITE:
pspec = gimp_param_spec_parasite (name, nick, blurb,
G_PARAM_READWRITE);
break;
case GIMP_PDB_STATUS:
pspec = g_param_spec_enum (name, nick, blurb,
GIMP_TYPE_PDB_STATUS_TYPE,
GIMP_PDB_EXECUTION_ERROR,
G_PARAM_READWRITE);
break;
case GIMP_PDB_END:
break;
}
if (! pspec)
g_warning ("%s: returning NULL for %s (%s)",
G_STRFUNC, name, _gimp_pdb_arg_type_to_string (arg_type));
return pspec;
}
GType
_gimp_pdb_arg_type_to_gtype (GimpPDBArgType type)
{
switch (type)
{
case GIMP_PDB_INT32:
Remove GIMP_TYPE_INT32 and GimpParamSpecInt32 Use gint and GParamSpecInt instead.
2019-08-15 14:04:56 +02:00
return G_TYPE_INT;
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
case GIMP_PDB_INT16:
Remove GIMP_TYPE_INT16 and GimpParamSpecInt16 Use gint and GParamSpecInt with the right value range instead.
2019-08-15 14:17:17 +02:00
return G_TYPE_INT;
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
case GIMP_PDB_INT8:
Remove GIMP_TYPE_INT8 and GimpParamSpecInt8 Use guchar and GParamSpecUChar instead.
2019-08-15 13:34:11 +02:00
return G_TYPE_UCHAR;
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
case GIMP_PDB_FLOAT:
return G_TYPE_DOUBLE;
case GIMP_PDB_STRING:
return G_TYPE_STRING;
case GIMP_PDB_INT32ARRAY:
return GIMP_TYPE_INT32_ARRAY;
case GIMP_PDB_INT16ARRAY:
return GIMP_TYPE_INT16_ARRAY;
case GIMP_PDB_INT8ARRAY:
Rename GIMP_TYPE_INT8_ARRAY to GIMP_TYPE_UINT8_ARRAY and GimpParamSpecInt8Array to GimpParamSpecUInt8Array
2019-08-15 15:04:34 +02:00
return GIMP_TYPE_UINT8_ARRAY;
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
case GIMP_PDB_FLOATARRAY:
return GIMP_TYPE_FLOAT_ARRAY;
case GIMP_PDB_STRINGARRAY:
return GIMP_TYPE_STRING_ARRAY;
case GIMP_PDB_COLOR:
return GIMP_TYPE_RGB;
case GIMP_PDB_ITEM:
app, libgimp: get rid of all ID GTypes and ID param specs Turn all ID param specs into object param specs (e.g. GimpParamImageID becomes GimpParamImage) and convert between IDs and objects in gimpgpparams.c directly above the the wire protocol, so all of app/, libgimp/ and plug-ins/ can deal directly with objects down to the lowest level and not care about IDs. Use the actual object param specs for procedure arguments and return values again instead of a plain g_param_spec_object() and bring back the none_ok parameter. This implies changing the PDB type checking functions to work on pure integers instead of IDs (one can't check whether object creation is possible if performing that check requires the object to already exist). For example gimp_foo_is_valid() becomes gimp_foo_id_is_valid() and is not involved in automatic object creation magic at the protocol level. Added wrappers which still say gimp_foo_is_valid() and take the respective objects. Adapted all code, and it all becomes nicer and less convoluted, even the generated PDB wrappers in app/ and libgimp/.
2019-08-29 11:25:35 +02:00
return GIMP_TYPE_ITEM;
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
case GIMP_PDB_DISPLAY:
app, libgimp: get rid of all ID GTypes and ID param specs Turn all ID param specs into object param specs (e.g. GimpParamImageID becomes GimpParamImage) and convert between IDs and objects in gimpgpparams.c directly above the the wire protocol, so all of app/, libgimp/ and plug-ins/ can deal directly with objects down to the lowest level and not care about IDs. Use the actual object param specs for procedure arguments and return values again instead of a plain g_param_spec_object() and bring back the none_ok parameter. This implies changing the PDB type checking functions to work on pure integers instead of IDs (one can't check whether object creation is possible if performing that check requires the object to already exist). For example gimp_foo_is_valid() becomes gimp_foo_id_is_valid() and is not involved in automatic object creation magic at the protocol level. Added wrappers which still say gimp_foo_is_valid() and take the respective objects. Adapted all code, and it all becomes nicer and less convoluted, even the generated PDB wrappers in app/ and libgimp/.
2019-08-29 11:25:35 +02:00
return GIMP_TYPE_DISPLAY;
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
case GIMP_PDB_IMAGE:
app, libgimp: get rid of all ID GTypes and ID param specs Turn all ID param specs into object param specs (e.g. GimpParamImageID becomes GimpParamImage) and convert between IDs and objects in gimpgpparams.c directly above the the wire protocol, so all of app/, libgimp/ and plug-ins/ can deal directly with objects down to the lowest level and not care about IDs. Use the actual object param specs for procedure arguments and return values again instead of a plain g_param_spec_object() and bring back the none_ok parameter. This implies changing the PDB type checking functions to work on pure integers instead of IDs (one can't check whether object creation is possible if performing that check requires the object to already exist). For example gimp_foo_is_valid() becomes gimp_foo_id_is_valid() and is not involved in automatic object creation magic at the protocol level. Added wrappers which still say gimp_foo_is_valid() and take the respective objects. Adapted all code, and it all becomes nicer and less convoluted, even the generated PDB wrappers in app/ and libgimp/.
2019-08-29 11:25:35 +02:00
return GIMP_TYPE_IMAGE;
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
case GIMP_PDB_LAYER:
app, libgimp: get rid of all ID GTypes and ID param specs Turn all ID param specs into object param specs (e.g. GimpParamImageID becomes GimpParamImage) and convert between IDs and objects in gimpgpparams.c directly above the the wire protocol, so all of app/, libgimp/ and plug-ins/ can deal directly with objects down to the lowest level and not care about IDs. Use the actual object param specs for procedure arguments and return values again instead of a plain g_param_spec_object() and bring back the none_ok parameter. This implies changing the PDB type checking functions to work on pure integers instead of IDs (one can't check whether object creation is possible if performing that check requires the object to already exist). For example gimp_foo_is_valid() becomes gimp_foo_id_is_valid() and is not involved in automatic object creation magic at the protocol level. Added wrappers which still say gimp_foo_is_valid() and take the respective objects. Adapted all code, and it all becomes nicer and less convoluted, even the generated PDB wrappers in app/ and libgimp/.
2019-08-29 11:25:35 +02:00
return GIMP_TYPE_LAYER;
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
case GIMP_PDB_CHANNEL:
app, libgimp: get rid of all ID GTypes and ID param specs Turn all ID param specs into object param specs (e.g. GimpParamImageID becomes GimpParamImage) and convert between IDs and objects in gimpgpparams.c directly above the the wire protocol, so all of app/, libgimp/ and plug-ins/ can deal directly with objects down to the lowest level and not care about IDs. Use the actual object param specs for procedure arguments and return values again instead of a plain g_param_spec_object() and bring back the none_ok parameter. This implies changing the PDB type checking functions to work on pure integers instead of IDs (one can't check whether object creation is possible if performing that check requires the object to already exist). For example gimp_foo_is_valid() becomes gimp_foo_id_is_valid() and is not involved in automatic object creation magic at the protocol level. Added wrappers which still say gimp_foo_is_valid() and take the respective objects. Adapted all code, and it all becomes nicer and less convoluted, even the generated PDB wrappers in app/ and libgimp/.
2019-08-29 11:25:35 +02:00
return GIMP_TYPE_CHANNEL;
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
case GIMP_PDB_DRAWABLE:
app, libgimp: get rid of all ID GTypes and ID param specs Turn all ID param specs into object param specs (e.g. GimpParamImageID becomes GimpParamImage) and convert between IDs and objects in gimpgpparams.c directly above the the wire protocol, so all of app/, libgimp/ and plug-ins/ can deal directly with objects down to the lowest level and not care about IDs. Use the actual object param specs for procedure arguments and return values again instead of a plain g_param_spec_object() and bring back the none_ok parameter. This implies changing the PDB type checking functions to work on pure integers instead of IDs (one can't check whether object creation is possible if performing that check requires the object to already exist). For example gimp_foo_is_valid() becomes gimp_foo_id_is_valid() and is not involved in automatic object creation magic at the protocol level. Added wrappers which still say gimp_foo_is_valid() and take the respective objects. Adapted all code, and it all becomes nicer and less convoluted, even the generated PDB wrappers in app/ and libgimp/.
2019-08-29 11:25:35 +02:00
return GIMP_TYPE_DRAWABLE;
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
case GIMP_PDB_SELECTION:
app, libgimp: get rid of all ID GTypes and ID param specs Turn all ID param specs into object param specs (e.g. GimpParamImageID becomes GimpParamImage) and convert between IDs and objects in gimpgpparams.c directly above the the wire protocol, so all of app/, libgimp/ and plug-ins/ can deal directly with objects down to the lowest level and not care about IDs. Use the actual object param specs for procedure arguments and return values again instead of a plain g_param_spec_object() and bring back the none_ok parameter. This implies changing the PDB type checking functions to work on pure integers instead of IDs (one can't check whether object creation is possible if performing that check requires the object to already exist). For example gimp_foo_is_valid() becomes gimp_foo_id_is_valid() and is not involved in automatic object creation magic at the protocol level. Added wrappers which still say gimp_foo_is_valid() and take the respective objects. Adapted all code, and it all becomes nicer and less convoluted, even the generated PDB wrappers in app/ and libgimp/.
2019-08-29 11:25:35 +02:00
return GIMP_TYPE_SELECTION;
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
case GIMP_PDB_COLORARRAY:
return GIMP_TYPE_RGB_ARRAY;
case GIMP_PDB_VECTORS:
app, libgimp: get rid of all ID GTypes and ID param specs Turn all ID param specs into object param specs (e.g. GimpParamImageID becomes GimpParamImage) and convert between IDs and objects in gimpgpparams.c directly above the the wire protocol, so all of app/, libgimp/ and plug-ins/ can deal directly with objects down to the lowest level and not care about IDs. Use the actual object param specs for procedure arguments and return values again instead of a plain g_param_spec_object() and bring back the none_ok parameter. This implies changing the PDB type checking functions to work on pure integers instead of IDs (one can't check whether object creation is possible if performing that check requires the object to already exist). For example gimp_foo_is_valid() becomes gimp_foo_id_is_valid() and is not involved in automatic object creation magic at the protocol level. Added wrappers which still say gimp_foo_is_valid() and take the respective objects. Adapted all code, and it all becomes nicer and less convoluted, even the generated PDB wrappers in app/ and libgimp/.
2019-08-29 11:25:35 +02:00
return GIMP_TYPE_VECTORS;
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
case GIMP_PDB_PARASITE:
return GIMP_TYPE_PARASITE;
case GIMP_PDB_STATUS:
return GIMP_TYPE_PDB_STATUS_TYPE;
case GIMP_PDB_END:
break;
}
g_warning ("%s: returning G_TYPE_NONE for %d (%s)",
G_STRFUNC, type, _gimp_pdb_arg_type_to_string (type));
return G_TYPE_NONE;
}
GimpPDBArgType
_gimp_pdb_gtype_to_arg_type (GType type)
{
static GQuark pdb_type_quark = 0;
GimpPDBArgType pdb_type;
if (! pdb_type_quark)
{
struct
{
GType g_type;
GimpPDBArgType pdb_type;
}
type_mapping[] =
{
{ G_TYPE_INT, GIMP_PDB_INT32 },
{ G_TYPE_UINT, GIMP_PDB_INT32 },
{ G_TYPE_ENUM, GIMP_PDB_INT32 },
{ G_TYPE_BOOLEAN, GIMP_PDB_INT32 },
Remove GIMP_TYPE_INT8 and GimpParamSpecInt8 Use guchar and GParamSpecUChar instead.
2019-08-15 13:34:11 +02:00
{ G_TYPE_UCHAR, GIMP_PDB_INT8 },
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
{ G_TYPE_DOUBLE, GIMP_PDB_FLOAT },
{ G_TYPE_STRING, GIMP_PDB_STRING },
{ GIMP_TYPE_RGB, GIMP_PDB_COLOR },
{ GIMP_TYPE_INT32_ARRAY, GIMP_PDB_INT32ARRAY },
{ GIMP_TYPE_INT16_ARRAY, GIMP_PDB_INT16ARRAY },
Rename GIMP_TYPE_INT8_ARRAY to GIMP_TYPE_UINT8_ARRAY and GimpParamSpecInt8Array to GimpParamSpecUInt8Array
2019-08-15 15:04:34 +02:00
{ GIMP_TYPE_UINT8_ARRAY, GIMP_PDB_INT8ARRAY },
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
{ GIMP_TYPE_FLOAT_ARRAY, GIMP_PDB_FLOATARRAY },
{ GIMP_TYPE_STRING_ARRAY, GIMP_PDB_STRINGARRAY },
{ GIMP_TYPE_RGB_ARRAY, GIMP_PDB_COLORARRAY },
app, libgimp: get rid of all ID GTypes and ID param specs Turn all ID param specs into object param specs (e.g. GimpParamImageID becomes GimpParamImage) and convert between IDs and objects in gimpgpparams.c directly above the the wire protocol, so all of app/, libgimp/ and plug-ins/ can deal directly with objects down to the lowest level and not care about IDs. Use the actual object param specs for procedure arguments and return values again instead of a plain g_param_spec_object() and bring back the none_ok parameter. This implies changing the PDB type checking functions to work on pure integers instead of IDs (one can't check whether object creation is possible if performing that check requires the object to already exist). For example gimp_foo_is_valid() becomes gimp_foo_id_is_valid() and is not involved in automatic object creation magic at the protocol level. Added wrappers which still say gimp_foo_is_valid() and take the respective objects. Adapted all code, and it all becomes nicer and less convoluted, even the generated PDB wrappers in app/ and libgimp/.
2019-08-29 11:25:35 +02:00
{ GIMP_TYPE_ITEM, GIMP_PDB_ITEM },
{ GIMP_TYPE_DISPLAY, GIMP_PDB_DISPLAY },
{ GIMP_TYPE_IMAGE, GIMP_PDB_IMAGE },
{ GIMP_TYPE_LAYER, GIMP_PDB_LAYER },
{ GIMP_TYPE_CHANNEL, GIMP_PDB_CHANNEL },
{ GIMP_TYPE_DRAWABLE, GIMP_PDB_DRAWABLE },
{ GIMP_TYPE_SELECTION, GIMP_PDB_SELECTION },
{ GIMP_TYPE_LAYER_MASK, GIMP_PDB_CHANNEL },
{ GIMP_TYPE_VECTORS, GIMP_PDB_VECTORS },
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
{ GIMP_TYPE_PARASITE, GIMP_PDB_PARASITE },
{ GIMP_TYPE_PDB_STATUS_TYPE, GIMP_PDB_STATUS }
};
gint i;
pdb_type_quark = g_quark_from_static_string ("gimp-pdb-type");
for (i = 0; i < G_N_ELEMENTS (type_mapping); i++)
g_type_set_qdata (type_mapping[i].g_type, pdb_type_quark,
GINT_TO_POINTER (type_mapping[i].pdb_type));
}
pdb_type = GPOINTER_TO_INT (g_type_get_qdata (type, pdb_type_quark));
#if 0
g_printerr ("%s: arg_type = %p (%s) -> %d (%s)\n",
G_STRFUNC,
(gpointer) type, g_type_name (type),
pdb_type, _gimp_pdb_arg_type_to_string (pdb_type));
#endif
return pdb_type;
}
GimpValueArray *
app, libgimp, libgimpbase: big plug-in API refactoring part three - libgimpbase: change GPParam to transfer all information about the GValues we use, in the same way done for GPParamDef. GPParam is now different from GimpParam from libgimp, pointers can't be casted any longer. The protocol is now completely GimpPDBArgType-free. Remove gp_params_destroy() from the public API. - libgimp: add API to convert between an array of GPParams and GimpValueArray, the latter is now the new official API for dealing with procedure arguments and return values, GimpParam is cruft (the wire now talks with GimpPlugIn more directly than with the members of GimpPlugInInfo, which need additional compat conversions). - libgimp, app: rename gimpgpparamspecs.[ch] to simply gimpgpparams.[ch] which is also more accurate because they now contain GValue functions too. The code that used to live in app/plug-in/plug-in-params.h is now completely in libgimp. - app: contains no protocol compat code any longer, the only place that uses GimpPDBArgType is the PDB query procedure implementation, which also needs to change. - app: change some forgotten int32 run-modes to enums.
2019-07-29 01:56:58 +02:00
_gimp_params_to_value_array (const GimpParam *params,
gint n_params,
gboolean full_copy)
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
{
GimpValueArray *args;
gint i;
g_return_val_if_fail ((params != NULL && n_params > 0) ||
(params == NULL && n_params == 0), NULL);
args = gimp_value_array_new (n_params);
for (i = 0; i < n_params; i++)
{
GValue value = G_VALUE_INIT;
app, libgimp, libgimpbase: big plug-in API refactoring part three - libgimpbase: change GPParam to transfer all information about the GValues we use, in the same way done for GPParamDef. GPParam is now different from GimpParam from libgimp, pointers can't be casted any longer. The protocol is now completely GimpPDBArgType-free. Remove gp_params_destroy() from the public API. - libgimp: add API to convert between an array of GPParams and GimpValueArray, the latter is now the new official API for dealing with procedure arguments and return values, GimpParam is cruft (the wire now talks with GimpPlugIn more directly than with the members of GimpPlugInInfo, which need additional compat conversions). - libgimp, app: rename gimpgpparamspecs.[ch] to simply gimpgpparams.[ch] which is also more accurate because they now contain GValue functions too. The code that used to live in app/plug-in/plug-in-params.h is now completely in libgimp. - app: contains no protocol compat code any longer, the only place that uses GimpPDBArgType is the PDB query procedure implementation, which also needs to change. - app: change some forgotten int32 run-modes to enums.
2019-07-29 01:56:58 +02:00
GType type = _gimp_pdb_arg_type_to_gtype (params[i].type);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
gint count;
g_value_init (&value, type);
switch (_gimp_pdb_gtype_to_arg_type (type))
{
case GIMP_PDB_INT32:
if (G_VALUE_HOLDS_INT (&value))
g_value_set_int (&value, params[i].data.d_int32);
else if (G_VALUE_HOLDS_UINT (&value))
g_value_set_uint (&value, params[i].data.d_int32);
else if (G_VALUE_HOLDS_ENUM (&value))
g_value_set_enum (&value, params[i].data.d_int32);
else if (G_VALUE_HOLDS_BOOLEAN (&value))
g_value_set_boolean (&value, params[i].data.d_int32 ? TRUE : FALSE);
else
{
g_printerr ("%s: unhandled GIMP_PDB_INT32 type: %s\n",
G_STRFUNC, g_type_name (G_VALUE_TYPE (&value)));
g_return_val_if_reached (args);
}
break;
case GIMP_PDB_INT16:
g_value_set_int (&value, params[i].data.d_int16);
break;
case GIMP_PDB_INT8:
Remove GIMP_TYPE_INT8 and GimpParamSpecInt8 Use guchar and GParamSpecUChar instead.
2019-08-15 13:34:11 +02:00
g_value_set_uchar (&value, params[i].data.d_int8);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
break;
case GIMP_PDB_FLOAT:
g_value_set_double (&value, params[i].data.d_float);
break;
case GIMP_PDB_STRING:
if (full_copy)
g_value_set_string (&value, params[i].data.d_string);
else
g_value_set_static_string (&value, params[i].data.d_string);
break;
case GIMP_PDB_INT32ARRAY:
libgimp: use the new macros in all non-generated files
2019-08-20 01:21:32 +02:00
count = GIMP_VALUES_GET_INT (args, i - 1);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
if (full_copy)
gimp_value_set_int32_array (&value,
params[i].data.d_int32array,
count);
else
gimp_value_set_static_int32_array (&value,
params[i].data.d_int32array,
count);
break;
case GIMP_PDB_INT16ARRAY:
libgimp: use the new macros in all non-generated files
2019-08-20 01:21:32 +02:00
count = GIMP_VALUES_GET_INT (args, i - 1);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
if (full_copy)
gimp_value_set_int16_array (&value,
params[i].data.d_int16array,
count);
else
gimp_value_set_static_int16_array (&value,
params[i].data.d_int16array,
count);
break;
case GIMP_PDB_INT8ARRAY:
libgimp: use the new macros in all non-generated files
2019-08-20 01:21:32 +02:00
count = GIMP_VALUES_GET_INT (args, i - 1);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
if (full_copy)
Rename GIMP_TYPE_INT8_ARRAY to GIMP_TYPE_UINT8_ARRAY and GimpParamSpecInt8Array to GimpParamSpecUInt8Array
2019-08-15 15:04:34 +02:00
gimp_value_set_uint8_array (&value,
params[i].data.d_int8array,
count);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
else
Rename GIMP_TYPE_INT8_ARRAY to GIMP_TYPE_UINT8_ARRAY and GimpParamSpecInt8Array to GimpParamSpecUInt8Array
2019-08-15 15:04:34 +02:00
gimp_value_set_static_uint8_array (&value,
params[i].data.d_int8array,
count);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
break;
case GIMP_PDB_FLOATARRAY:
libgimp: use the new macros in all non-generated files
2019-08-20 01:21:32 +02:00
count = GIMP_VALUES_GET_INT (args, i - 1);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
if (full_copy)
gimp_value_set_float_array (&value,
params[i].data.d_floatarray,
count);
else
gimp_value_set_static_float_array (&value,
params[i].data.d_floatarray,
count);
break;
case GIMP_PDB_STRINGARRAY:
libgimp: use the new macros in all non-generated files
2019-08-20 01:21:32 +02:00
count = GIMP_VALUES_GET_INT (args, i - 1);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
if (full_copy)
gimp_value_set_string_array (&value,
(const gchar **) params[i].data.d_stringarray,
count);
else
gimp_value_set_static_string_array (&value,
(const gchar **) params[i].data.d_stringarray,
count);
break;
case GIMP_PDB_COLOR:
gimp_value_set_rgb (&value, &params[i].data.d_color);
break;
case GIMP_PDB_ITEM:
g_value_set_int (&value, params[i].data.d_item);
break;
case GIMP_PDB_DISPLAY:
g_value_set_int (&value, params[i].data.d_display);
break;
case GIMP_PDB_IMAGE:
g_value_set_int (&value, params[i].data.d_image);
break;
case GIMP_PDB_LAYER:
g_value_set_int (&value, params[i].data.d_layer);
break;
case GIMP_PDB_CHANNEL:
g_value_set_int (&value, params[i].data.d_channel);
break;
case GIMP_PDB_DRAWABLE:
g_value_set_int (&value, params[i].data.d_drawable);
break;
case GIMP_PDB_SELECTION:
g_value_set_int (&value, params[i].data.d_selection);
break;
case GIMP_PDB_COLORARRAY:
libgimp: use the new macros in all non-generated files
2019-08-20 01:21:32 +02:00
count = GIMP_VALUES_GET_INT (args, i - 1);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
if (full_copy)
gimp_value_set_rgb_array (&value,
params[i].data.d_colorarray,
count);
else
gimp_value_set_static_rgb_array (&value,
params[i].data.d_colorarray,
count);
break;
case GIMP_PDB_VECTORS:
g_value_set_int (&value, params[i].data.d_vectors);
break;
case GIMP_PDB_PARASITE:
if (full_copy)
g_value_set_boxed (&value, &params[i].data.d_parasite);
else
g_value_set_static_boxed (&value, &params[i].data.d_parasite);
break;
case GIMP_PDB_STATUS:
g_value_set_enum (&value, params[i].data.d_status);
break;
case GIMP_PDB_END:
break;
}
gimp_value_array_append (args, &value);
g_value_unset (&value);
}
return args;
}
GimpParam *
app, libgimp, libgimpbase: big plug-in API refactoring part three - libgimpbase: change GPParam to transfer all information about the GValues we use, in the same way done for GPParamDef. GPParam is now different from GimpParam from libgimp, pointers can't be casted any longer. The protocol is now completely GimpPDBArgType-free. Remove gp_params_destroy() from the public API. - libgimp: add API to convert between an array of GPParams and GimpValueArray, the latter is now the new official API for dealing with procedure arguments and return values, GimpParam is cruft (the wire now talks with GimpPlugIn more directly than with the members of GimpPlugInInfo, which need additional compat conversions). - libgimp, app: rename gimpgpparamspecs.[ch] to simply gimpgpparams.[ch] which is also more accurate because they now contain GValue functions too. The code that used to live in app/plug-in/plug-in-params.h is now completely in libgimp. - app: contains no protocol compat code any longer, the only place that uses GimpPDBArgType is the PDB query procedure implementation, which also needs to change. - app: change some forgotten int32 run-modes to enums.
2019-07-29 01:56:58 +02:00
_gimp_value_array_to_params (GimpValueArray *args,
gboolean full_copy)
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
{
GimpParam *params;
gint length;
gint i;
g_return_val_if_fail (args != NULL, NULL);
params = g_new0 (GimpParam, gimp_value_array_length (args));
length = gimp_value_array_length (args);
for (i = 0; i < length; i++)
{
GValue *value = gimp_value_array_index (args, i);
params[i].type = _gimp_pdb_gtype_to_arg_type (G_VALUE_TYPE (value));
switch (params[i].type)
{
case GIMP_PDB_INT32:
if (G_VALUE_HOLDS_INT (value))
params[i].data.d_int32 = g_value_get_int (value);
else if (G_VALUE_HOLDS_UINT (value))
params[i].data.d_int32 = g_value_get_uint (value);
else if (G_VALUE_HOLDS_ENUM (value))
params[i].data.d_int32 = g_value_get_enum (value);
else if (G_VALUE_HOLDS_BOOLEAN (value))
params[i].data.d_int32 = g_value_get_boolean (value);
else
{
g_printerr ("%s: unhandled GIMP_PDB_INT32 type: %s\n",
G_STRFUNC, g_type_name (G_VALUE_TYPE (value)));
g_return_val_if_reached (params);
}
break;
case GIMP_PDB_INT16:
params[i].data.d_int16 = g_value_get_int (value);
break;
case GIMP_PDB_INT8:
Remove GIMP_TYPE_INT8 and GimpParamSpecInt8 Use guchar and GParamSpecUChar instead.
2019-08-15 13:34:11 +02:00
params[i].data.d_int8 = g_value_get_uchar (value);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
break;
case GIMP_PDB_FLOAT:
params[i].data.d_float = g_value_get_double (value);
break;
case GIMP_PDB_STRING:
if (full_copy)
params[i].data.d_string = g_value_dup_string (value);
else
params[i].data.d_string = (gchar *) g_value_get_string (value);
break;
case GIMP_PDB_INT32ARRAY:
if (full_copy)
params[i].data.d_int32array = gimp_value_dup_int32_array (value);
else
params[i].data.d_int32array = (gint32 *) gimp_value_get_int32_array (value);
break;
case GIMP_PDB_INT16ARRAY:
if (full_copy)
params[i].data.d_int16array = gimp_value_dup_int16_array (value);
else
params[i].data.d_int16array = (gint16 *) gimp_value_get_int16_array (value);
break;
case GIMP_PDB_INT8ARRAY:
if (full_copy)
Rename GIMP_TYPE_INT8_ARRAY to GIMP_TYPE_UINT8_ARRAY and GimpParamSpecInt8Array to GimpParamSpecUInt8Array
2019-08-15 15:04:34 +02:00
params[i].data.d_int8array = gimp_value_dup_uint8_array (value);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
else
Rename GIMP_TYPE_INT8_ARRAY to GIMP_TYPE_UINT8_ARRAY and GimpParamSpecInt8Array to GimpParamSpecUInt8Array
2019-08-15 15:04:34 +02:00
params[i].data.d_int8array = (guint8 *) gimp_value_get_uint8_array (value);
app, libgimp, libgimpbase: plug-in and PDB protocol refactoring part two - Change the wire protocol's GPProcInstall to transmit the entire information needed for constructing all GParamSpecs we use, don't use GimpPDBArgType in GPProcInstall but an enum private to the wire protocol plus the GParamSpec's GType name. Bump the wire protocol version. - Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which take care of converting between GPParamDef and GParamSpec. They share code as far as possible. - Change pluginrc writing and parsing to re-use GPParamDef and the utility functions from gimpgpparamspecs. - Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch], the entire core uses proper GParamSpecs from the wire protocol now, the whole file will follow down the drain once we use a GValue representation on the wire too. - In gimp_plug_in_handle_proc_install(), change the "run-mode" parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not already an enum). and change all places in app/ to treat it as an enum value. - plug-ins: fix cml-explorer to register correctly, a typo in "run-mode" was never noticed until now. - Add gimpgpcompat.[ch] in libgimp to deal with all the transforms between old-style wire communication and using GParamSpec and GValue, it contains some functions that are subject to change or even removal in the next steps. - Change the libgimp GimpProcedure and GimpPlugIn in many ways to be able to actually install procedures the new way. - plug-ins: change goat-exercise to completely use the new GimpPlugIn and GimpProcedure API, look here to see how plug-ins will look in the future, of course subject to change until this is finished. - Next: changing GPParam to transmit all information about a GValue.
2019-07-27 16:37:55 +02:00
break;
case GIMP_PDB_FLOATARRAY:
if (full_copy)
params[i].data.d_floatarray = gimp_value_dup_float_array (value);
else
params[i].data.d_floatarray = (gdouble *) gimp_value_get_float_array (value);
break;
case GIMP_PDB_STRINGARRAY:
if (full_copy)
params[i].data.d_stringarray = gimp_value_dup_string_array (value);
else
params[i].data.d_stringarray = (gchar **) gimp_value_get_string_array (value);
break;
case GIMP_PDB_COLOR:
gimp_value_get_rgb (value, &params[i].data.d_color);
break;
case GIMP_PDB_ITEM:
params[i].data.d_item = g_value_get_int (value);
break;
case GIMP_PDB_DISPLAY:
params[i].data.d_display = g_value_get_int (value);
break;
case GIMP_PDB_IMAGE:
params[i].data.d_image = g_value_get_int (value);
break;
case GIMP_PDB_LAYER:
params[i].data.d_layer = g_value_get_int (value);
break;
case GIMP_PDB_CHANNEL:
params[i].data.d_channel = g_value_get_int (value);
break;
case GIMP_PDB_DRAWABLE:
params[i].data.d_drawable = g_value_get_int (value);
break;
case GIMP_PDB_SELECTION:
params[i].data.d_selection = g_value_get_int (value);
break;
case GIMP_PDB_COLORARRAY:
if (full_copy)
params[i].data.d_colorarray = gimp_value_dup_rgb_array (value);
else
params[i].data.d_colorarray = (GimpRGB *) gimp_value_get_rgb_array (value);
break;
case GIMP_PDB_VECTORS:
params[i].data.d_vectors = g_value_get_int (value);
break;
case GIMP_PDB_PARASITE:
{
GimpParasite *parasite = (full_copy ?
g_value_dup_boxed (value) :
g_value_get_boxed (value));
if (parasite)
{
params[i].data.d_parasite.name = parasite->name;
params[i].data.d_parasite.flags = parasite->flags;
params[i].data.d_parasite.size = parasite->size;
params[i].data.d_parasite.data = parasite->data;
if (full_copy)
{
parasite->name = NULL;
parasite->flags = 0;
parasite->size = 0;
parasite->data = NULL;
gimp_parasite_free (parasite);
}
}
else
{
params[i].data.d_parasite.name = NULL;
params[i].data.d_parasite.flags = 0;
params[i].data.d_parasite.size = 0;
params[i].data.d_parasite.data = NULL;
}
}
break;
case GIMP_PDB_STATUS:
params[i].data.d_status = g_value_get_enum (value);
break;
case GIMP_PDB_END:
break;
}
}
return params;
}
app, libgimp, libgimpbase: big plug-in API refactoring part three - libgimpbase: change GPParam to transfer all information about the GValues we use, in the same way done for GPParamDef. GPParam is now different from GimpParam from libgimp, pointers can't be casted any longer. The protocol is now completely GimpPDBArgType-free. Remove gp_params_destroy() from the public API. - libgimp: add API to convert between an array of GPParams and GimpValueArray, the latter is now the new official API for dealing with procedure arguments and return values, GimpParam is cruft (the wire now talks with GimpPlugIn more directly than with the members of GimpPlugInInfo, which need additional compat conversions). - libgimp, app: rename gimpgpparamspecs.[ch] to simply gimpgpparams.[ch] which is also more accurate because they now contain GValue functions too. The code that used to live in app/plug-in/plug-in-params.h is now completely in libgimp. - app: contains no protocol compat code any longer, the only place that uses GimpPDBArgType is the PDB query procedure implementation, which also needs to change. - app: change some forgotten int32 run-modes to enums.
2019-07-29 01:56:58 +02:00
/* private functions */
gchar *
_gimp_pdb_arg_type_to_string (GimpPDBArgType type)
{
const gchar *name;
if (! gimp_enum_get_value (GIMP_TYPE_PDB_ARG_TYPE, type,
&name, NULL, NULL, NULL))
{
return g_strdup_printf ("(PDB type %d unknown)", type);
}
return g_strdup (name);
}
Reference in a new issue Copy permalink