This patch fix a simple typo in the comment of libgfortran.
No user facing change here.
libgfortran/ChangeLog:
* io/read.c (read_f): Comment typo, explict -> explicit.
Signed-off-by: Yuao Ma <c8ef@outlook.com>
PR fortran/117819
libgfortran/ChangeLog:
* io/read.c (read_decimal): If the read value is short of the
specified width and pad mode is PAD yes, check for BLANK ZERO
and adjust the value accordingly.
(read_decimal_unsigned): Likewise.
(read_radix): Likewise.
gcc/testsuite/ChangeLog:
* gfortran.dg/pr117819.f90: New test.
PR libfortran/105473
libgfortran/ChangeLog:
* io/list_read.c (eat_separator): Reject comma as a
seprator when it is being used as a decimal point.
(parse_real): Reject a '.' when is should be a comma.
(read_real): Likewise.
* io/read.c (read_f): Add more checks for ',' and '.'
conditions.
gcc/testsuite/ChangeLog:
* gfortran.dg/pr105473.f90: New test.
PR fortran/99210
libgfortran/ChangeLog:
* io/read.c (read_x): If UTF-8 encoding is enabled, use
read_utf8 to move one character over in the read buffer.
gcc/testsuite/ChangeLog:
* gfortran.dg/pr99210.f90: New test.
As mentioned by Joseph in PR105101, glibc 2.26 or later has on x86
(both -m32/-m64), powerpc64le, ia64 and mips support for
*f128 math/complex APIs plus strtof128 and strfromf128, and these APIs allow
us to avoid libquadmath for Fortran purposes on these architectures,
replace *q math/complex APIs, strtof128 instead of strtoflt128 and,
while strfromf128 unfortunately isn't a perfect replacement to
quadmath_snprintf, it can be made to work.
The advantage of this is that when configured against such glibcs
(2.26 is now almost 5 years old), we can avoid linking against an extra shared
library and the math support in glibc is maintained better than libquadmath.
We need both a compiler change (so that for glibc 2.26+ it uses *f128 APIs
instead of *q) and library change.
The above mentioned problem with strfromf128 is that the strfrom* functions
are severely restricted versions of snprintf. In libgfortran, we handle
!isfinite differently and just use snprintf/quadmath_snprintf for
%+-#.*{L,Q}{f,e} printing.
strfrom* doesn't allow +, -, # modifiers and it only supports .34 or
similar precision, not .* . The L/Q etc. letters are omitted.
The + is there to force + sign at the start if it is positive.
Workaround in the patch is to add the + at the start manually for
!signbit (val).
The - (left alignment instead of right) I don't understand why we need it,
when minimum field width isn't specified (for strfrom* can't be specified),
no padding is ever added anywhere I believe.
The # is to force adding . - workaround is to search for first . or e or '\0'
character, if it is '\0', just append ., if it is e, insert . before e and
memmove the rest (which is just a few bytes, e, +/- and at most a few digits)
one byte later.
The .* case is handled by creating the format string for strfrom* by
snprintf into a temporary buffer.
As requested, this patch also switches from using __float128 type in
libgfortran to _Float128 which is equivalent on all arches that support
__float128.
The change is done in a backwards compatible change, when GCC is configured
against glibc 2.26 or newer, libgfortran.so.5 itself doesn't link against
-lquadmath nor uses any libquadmath APIs, libgfortran.a doesn't use any
libquadmath APIs either. User programs and libraries when being linked
by gfortran driver are linked against -lgfortran and -lquadmath, but
the latter only in the --as-needed linker mode, which means it needs
to be around during linking and will be linked in if there are any
calls to math/complex functions with real(kind=16) or complex(kind=16)
in compilation units compiled by older versions of gcc, but if either
user code doesn't call those math/complex functions for the largest
supported kind, or the code is recompiled by gcc with this change in,
libquadmath won't be linked in.
2022-06-28 Jakub Jelinek <jakub@redhat.com>
gcc/fortran/
* gfortran.h (gfc_real_info): Add use_iec_60559 bitfield.
* trans-types.h (gfc_real16_use_iec_60559): Declare.
* trans-types.cc (gfc_real16_use_iec_60559): Define.
(gfc_init_kinds): When building powerpc64le-linux libgfortran
on glibc 2.26 to 2.31, set gfc_real16_use_iec_60559 and
use_iec_60559.
(gfc_build_real_type): Set gfc_real16_use_iec_60559 and use_iec_60559
on glibc 2.26 or later.
* trans-intrinsic.cc (gfc_build_intrinsic_lib_fndecls): Adjust
comment. Handle gfc_real16_use_iec_60559.
(gfc_get_intrinsic_lib_fndecl): Handle use_iec_60559.
libgfortran/
* configure.ac: Check for strtof128 and strfromf128.
Check for math and complex *f128 functions. Set
have_iec_60559_libc_support to yes if *f128 support is around, for
--enable-libquadmath-support default to "default" rather than yes if
have_iec_60559_libc_support is yes.
* acinclude.m4 (LIBGFOR_CHECK_FLOAT128): Test
_Float128/_Complex _Float128 rather than __float128 and
_Complex float __attribute__((mode(TC))). If libquadmath support
is defaulted and have_iec_60559_libc_support is yes, define and subst
USE_IEC_60559. Remove unused LIBGFOR_BUILD_QUAD conditional.
* Makefile.am (kinds.h): Pass @USE_IEC_60559@ as an extra
mk-kinds-h.sh argument.
* mk-kinds-h.sh: Accept 4th use_iec_60559 argument. Use
_Float128/_Complex _Float128 types instead of __float128 and
_Complex float __attribute__((mode(TC))), and if use_iec_60559 is yes,
use f128 suffix instead of q and define GFC_REAL_16_USE_IEC_60559.
* kinds-override.h: Use _Float128/_Complex _Float128 types instead of
__float128 and _Complex float __attribute__((mode(TC))), if
USE_IEC_60559 is defined, use f128 suffixes instead of q and
define GFC_REAL_17_USE_IEC_60559.
* libgfortran.h: Don't include quadmath_weak.h if USE_IEC_60559 is
defined.
(GFC_REAL_16_INFINITY, GFC_REAL_16_QUIET_NAN): Define
for GFC_REAL_16_USE_IEC_60559 differently.
* caf/single.c (convert_type): Use _Float128/_Complex _Float128
instead of __float128 and _Complex float __attribute__((mode(TC))).
For HAVE_GFC_REAL_10 when HAVE_GFC_REAL_16 isn't defined use
_Complex long double instead of long double.
* ieee/issignaling_fallback.h (ieee854_float128_shape_type): Use
_Float128 instead of __float128.
(__issignalingf128): Change argument type to _Float128.
(issignaling): Use _Float128 instead of __float128 in _Generic.
* intrinsics/cshift0.c (cshift0): Use _Float128 instead of __float128
in a comment. Fix a comment typo, logn double -> long double.
* intrinsics/erfc_scaled.c (_THRESH, _M_2_SQRTPI, _INF, _ERFC, _EXP):
Use different definitions if GFC_REAL_16_USE_IEC_60559.
(_THRESH, _M_2_SQRTPI): Use GFC_REAL_17_LITERAL macro.
(_ERFC, _EXP): Use different definitions if GFC_REAL_17_USE_IEC_60559.
* intrinsics/spread_generic.c (spread, spread_scalar): Use _Float128
instead of __float128 in a comment. Fix a comment typo,
logn double -> long double.
* intrinsics/trigd.c (ENABLE_SIND, ENABLE_COSD, ENABLE_TAND): Handle
GFC_REAL_16_USE_IEC_60559.
* intrinsics/pack_generic.c (pack): Use _Float128 instead of
__float128 in a comment. Fix a comment typo, logn double ->
long double.
* intrinsics/unpack_generic.c (unpack1, unpack0): Likewise.
* runtime/in_pack_generic.c (internal_pack): Likewise.
* runtime/in_unpack_generic.c (internal_unpack): Likewise.
* io/read.c (convert_real, convert_infnan): Handle
GFC_REAL_16_USE_IEC_60559 and GFC_REAL_17_USE_IEC_60559.
* io/transfer128.c (tmp1, tmp2): Don't define if libquadmath
isn't needed.
* io/write_float.def (gfor_strfromf128): New function.
(DTOA2Q, FDTOA2Q): Define differently if
GFC_REAL_16_USE_IEC_60559 or GFC_REAL_17_USE_IEC_60559.
* m4/mtype.m4: Use different suffix if GFC_REAL_16_USE_IEC_60559
or GFC_REAL_17_USE_IEC_60559.
* config.h.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
* generated/bessel_r16.c: Regenerated.
* generated/bessel_r17.c: Regenerated.
* generated/norm2_r16.c: Regenerated.
* generated/norm2_r17.c: Regenerated.
Functions from <ctype.h> should only be called on values that can be
represented by unsigned char. On targets where char is a signed type,
some of libgfortran calls have undefined behaviour.
The solution is to cast the argument to unsigned char type. I’ve defined
macros in libgfortran.h to do so, to retain legibility of the library
code.
PR libfortran/95177
libgfortran/ChangeLog
* libgfortran.h: include ctype.h, provide safe macros.
* io/format.c: use safe macros.
* io/list_read.c: use safe macros.
* io/read.c: use safe macros.
* io/write.c: use safe macros.
* runtime/environ.c: use safe macros.
2019-10-01 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/91593
* io/read.c (read_decimal): Cast constant to size_t to turn off
a bogus warning.
* io/write.c (btoa_big): Use memset in lieu of setting the null
byte in a string buffer to turn off a bogus warning.
From-SVN: r276439
gcc/fortran ChangeLog:
2019-05-22 Jeff Law <law@redhat.com>
Mark Eggleston <mark.eggleston@codethink.com>
PR fortran/89100
* gfortran.texi: Add Default widths for F, G and I format
descriptors to Extensions section.
* invoke.texi: Add -fdec-format-defaults
* io.c (check_format): Use default widths for i, f and g when
flag_dec_format_defaults is enabled.
* lang.opt: Add new option.
* options.c (set_dec_flags): Add SET_BITFLAG for
flag_dec_format_defaults.
gcc/testsuite ChangeLog:
2019-05-22 Mark Eggleston <mark.eggleston@codethink.com>
PR fortran/89100
* gfortran.dg/fmt_f_default_field_width_1.f90: New test.
* gfortran.dg/fmt_f_default_field_width_2.f90: New test.
* gfortran.dg/fmt_f_default_field_width_3.f90: New test.
* gfortran.dg/fmt_g_default_field_width_1.f90: New test.
* gfortran.dg/fmt_g_default_field_width_2.f90: New test.
* gfortran.dg/fmt_g_default_field_width_3.f90: New test.
* gfortran.dg/fmt_i_default_field_width_1.f90: New test.
* gfortran.dg/fmt_i_default_field_width_2.f90: New test.
* gfortran.dg/fmt_i_default_field_width_3.f90: New test.
libgfortran ChangeLog:
2019-05-22 Jeff Law <law@redhat.com>
PR fortran/89100
* io/format.c (parse_format_list): set default width when the
IOPARM_DT_DEC_EXT flag is set for i, f and g.
* io/io.h: add default_width_for_integer, default_width_for_float
and default_precision_for_float.
* io/write.c (write_boz): extra parameter giving length of data
corresponding to the type's kind.
(write_b): pass data length as extra parameter in calls to
write_boz.
(write_o): pass data length as extra parameter in calls to
write_boz.
(write_z): pass data length as extra parameter in calls to
write_boz.
(size_from_kind): also set size is default width is set.
* io/write_float.def (build_float_string): new paramter inserted
before result parameter. If default width use values passed
instead of the values in fnode.
(FORMAT_FLOAT): macro modified to check for default width and
calls to build_float_string to pass in default width.
(get_float_string): set width and precision to defaults when
needed.
From-SVN: r271511
2018-08-21 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.texi: Add description of asynchronous I/O.
* trans-decl.c (gfc_finish_var_decl): Treat asynchronous variables
as volatile.
* trans-io.c (gfc_build_io_library_fndecls): Rename st_wait to
st_wait_async and change argument spec from ".X" to ".w".
(gfc_trans_wait): Pass ID argument via reference.
2018-08-21 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.dg/f2003_inquire_1.f03: Add write statement.
* gfortran.dg/f2003_io_1.f03: Add wait statement.
2018-08-21 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* Makefile.am: Add async.c to gfor_io_src.
Add async.h to gfor_io_headers.
* Makefile.in: Regenerated.
* gfortran.map: Add _gfortran_st_wait_async.
* io/async.c: New file.
* io/async.h: New file.
* io/close.c: Include async.h.
(st_close): Call async_wait for an asynchronous unit.
* io/file_pos.c (st_backspace): Likewise.
(st_endfile): Likewise.
(st_rewind): Likewise.
(st_flush): Likewise.
* io/inquire.c: Add handling for asynchronous PENDING
and ID arguments.
* io/io.h (st_parameter_dt): Add async bit.
(st_parameter_wait): Correct.
(gfc_unit): Add au pointer.
(st_wait_async): Add prototype.
(transfer_array_inner): Likewise.
(st_write_done_worker): Likewise.
* io/open.c: Include async.h.
(new_unit): Initialize asynchronous unit.
* io/transfer.c (async_opt): New struct.
(wrap_scalar_transfer): New function.
(transfer_integer): Call wrap_scalar_transfer to do the work.
(transfer_real): Likewise.
(transfer_real_write): Likewise.
(transfer_character): Likewise.
(transfer_character_wide): Likewise.
(transfer_complex): Likewise.
(transfer_array_inner): New function.
(transfer_array): Call transfer_array_inner.
(transfer_derived): Call wrap_scalar_transfer.
(data_transfer_init): Check for asynchronous I/O.
Perform a wait operation on any pending asynchronous I/O
if the data transfer is synchronous. Copy PDT and enqueue
thread for data transfer.
(st_read_done_worker): New function.
(st_read_done): Enqueue transfer or call st_read_done_worker.
(st_write_done_worker): New function.
(st_write_done): Enqueue transfer or call st_read_done_worker.
(st_wait): Document as no-op for compatibility reasons.
(st_wait_async): New function.
* io/unit.c (insert_unit): Use macros LOCK, UNLOCK and TRYLOCK;
add NOTE where necessary.
(get_gfc_unit): Likewise.
(init_units): Likewise.
(close_unit_1): Likewise. Call async_close if asynchronous.
(close_unit): Use macros LOCK and UNLOCK.
(finish_last_advance_record): Likewise.
(newunit_alloc): Likewise.
* io/unix.c (find_file): Likewise.
(flush_all_units_1): Likewise.
(flush_all_units): Likewise.
* libgfortran.h (generate_error_common): Add prototype.
* runtime/error.c: Include io.h and async.h.
(generate_error_common): New function.
2018-08-21 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* testsuite/libgomp.fortran/async_io_1.f90: New test.
* testsuite/libgomp.fortran/async_io_2.f90: New test.
* testsuite/libgomp.fortran/async_io_3.f90: New test.
* testsuite/libgomp.fortran/async_io_4.f90: New test.
* testsuite/libgomp.fortran/async_io_5.f90: New test.
* testsuite/libgomp.fortran/async_io_6.f90: New test.
* testsuite/libgomp.fortran/async_io_7.f90: New test.
Co-Authored-By: Thomas Koenig <tkoenig@gcc.gnu.org>
From-SVN: r263750
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.texi: Add description of asynchronous I/O.
* trans-decl.c (gfc_finish_var_decl): Treat asynchronous variables
as volatile.
* trans-io.c (gfc_build_io_library_fndecls): Rename st_wait to
st_wait_async and change argument spec from ".X" to ".w".
(gfc_trans_wait): Pass ID argument via reference.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.dg/f2003_inquire_1.f03: Add write statement.
* gfortran.dg/f2003_io_1.f03: Add wait statement.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* Makefile.am: Add async.c to gfor_io_src.
Add async.h to gfor_io_headers.
* Makefile.in: Regenerated.
* gfortran.map: Add _gfortran_st_wait_async.
* io/async.c: New file.
* io/async.h: New file.
* io/close.c: Include async.h.
(st_close): Call async_wait for an asynchronous unit.
* io/file_pos.c (st_backspace): Likewise.
(st_endfile): Likewise.
(st_rewind): Likewise.
(st_flush): Likewise.
* io/inquire.c: Add handling for asynchronous PENDING
and ID arguments.
* io/io.h (st_parameter_dt): Add async bit.
(st_parameter_wait): Correct.
(gfc_unit): Add au pointer.
(st_wait_async): Add prototype.
(transfer_array_inner): Likewise.
(st_write_done_worker): Likewise.
* io/open.c: Include async.h.
(new_unit): Initialize asynchronous unit.
* io/transfer.c (async_opt): New struct.
(wrap_scalar_transfer): New function.
(transfer_integer): Call wrap_scalar_transfer to do the work.
(transfer_real): Likewise.
(transfer_real_write): Likewise.
(transfer_character): Likewise.
(transfer_character_wide): Likewise.
(transfer_complex): Likewise.
(transfer_array_inner): New function.
(transfer_array): Call transfer_array_inner.
(transfer_derived): Call wrap_scalar_transfer.
(data_transfer_init): Check for asynchronous I/O.
Perform a wait operation on any pending asynchronous I/O
if the data transfer is synchronous. Copy PDT and enqueue
thread for data transfer.
(st_read_done_worker): New function.
(st_read_done): Enqueue transfer or call st_read_done_worker.
(st_write_done_worker): New function.
(st_write_done): Enqueue transfer or call st_read_done_worker.
(st_wait): Document as no-op for compatibility reasons.
(st_wait_async): New function.
* io/unit.c (insert_unit): Use macros LOCK, UNLOCK and TRYLOCK;
add NOTE where necessary.
(get_gfc_unit): Likewise.
(init_units): Likewise.
(close_unit_1): Likewise. Call async_close if asynchronous.
(close_unit): Use macros LOCK and UNLOCK.
(finish_last_advance_record): Likewise.
(newunit_alloc): Likewise.
* io/unix.c (find_file): Likewise.
(flush_all_units_1): Likewise.
(flush_all_units): Likewise.
* libgfortran.h (generate_error_common): Add prototype.
* runtime/error.c: Include io.h and async.h.
(generate_error_common): New function.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'.
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* testsuite/libgomp.fortran/async_io_1.f90: New test.
* testsuite/libgomp.fortran/async_io_2.f90: New test.
* testsuite/libgomp.fortran/async_io_3.f90: New test.
* testsuite/libgomp.fortran/async_io_4.f90: New test.
* testsuite/libgomp.fortran/async_io_5.f90: New test.
* testsuite/libgomp.fortran/async_io_6.f90: New test.
* testsuite/libgomp.fortran/async_io_7.f90: New test.
From-SVN: r263082
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.texi: Add description of asynchronous I/O.
* trans-decl.c (gfc_finish_var_decl): Treat asynchronous variables
as volatile.
* trans-io.c (gfc_build_io_library_fndecls): Rename st_wait to
st_wait_async and change argument spec from ".X" to ".w".
(gfc_trans_wait): Pass ID argument via reference.
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.dg/f2003_inquire_1.f03: Add write statement.
* gfortran.dg/f2003_io_1.f03: Add wait statement.
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* Makefile.am: Add async.c to gfor_io_src.
Add async.h to gfor_io_headers.
* Makefile.in: Regenerated.
* gfortran.map: Add _gfortran_st_wait_async.
* io/async.c: New file.
* io/async.h: New file.
* io/close.c: Include async.h.
(st_close): Call async_wait for an asynchronous unit.
* io/file_pos.c (st_backspace): Likewise.
(st_endfile): Likewise.
(st_rewind): Likewise.
(st_flush): Likewise.
* io/inquire.c: Add handling for asynchronous PENDING
and ID arguments.
* io/io.h (st_parameter_dt): Add async bit.
(st_parameter_wait): Correct.
(gfc_unit): Add au pointer.
(st_wait_async): Add prototype.
(transfer_array_inner): Likewise.
(st_write_done_worker): Likewise.
* io/open.c: Include async.h.
(new_unit): Initialize asynchronous unit.
* io/transfer.c (async_opt): New struct.
(wrap_scalar_transfer): New function.
(transfer_integer): Call wrap_scalar_transfer to do the work.
(transfer_real): Likewise.
(transfer_real_write): Likewise.
(transfer_character): Likewise.
(transfer_character_wide): Likewise.
(transfer_complex): Likewise.
(transfer_array_inner): New function.
(transfer_array): Call transfer_array_inner.
(transfer_derived): Call wrap_scalar_transfer.
(data_transfer_init): Check for asynchronous I/O.
Perform a wait operation on any pending asynchronous I/O
if the data transfer is synchronous. Copy PDT and enqueue
thread for data transfer.
(st_read_done_worker): New function.
(st_read_done): Enqueue transfer or call st_read_done_worker.
(st_write_done_worker): New function.
(st_write_done): Enqueue transfer or call st_read_done_worker.
(st_wait): Document as no-op for compatibility reasons.
(st_wait_async): New function.
* io/unit.c (insert_unit): Use macros LOCK, UNLOCK and TRYLOCK;
add NOTE where necessary.
(get_gfc_unit): Likewise.
(init_units): Likewise.
(close_unit_1): Likewise. Call async_close if asynchronous.
(close_unit): Use macros LOCK and UNLOCK.
(finish_last_advance_record): Likewise.
(newunit_alloc): Likewise.
* io/unix.c (find_file): Likewise.
(flush_all_units_1): Likewise.
(flush_all_units): Likewise.
* libgfortran.h (generate_error_common): Add prototype.
* runtime/error.c: Include io.h and async.h.
(generate_error_common): New function.
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* testsuite/libgomp.fortran/async_io_1.f90: New test.
* testsuite/libgomp.fortran/async_io_2.f90: New test.
* testsuite/libgomp.fortran/async_io_3.f90: New test.
* testsuite/libgomp.fortran/async_io_4.f90: New test.
* testsuite/libgomp.fortran/async_io_5.f90: New test.
* testsuite/libgomp.fortran/async_io_6.f90: New test.
* testsuite/libgomp.fortran/async_io_7.f90: New test.
Co-Authored-By: Thomas Koenig <tkoenig@gcc.gnu.org>
From-SVN: r262978
In order to handle large characters when doing formatted I/O, use
size_t and ptrdiff_t for lengths. Compared to the previous patch,
based on discussions on IRC use size_t for sizes that don't need to be
negative rather than ptrdiff_t everywhere.
Regtested on x86_64-pc-linux-gnu, approved as part of the PR 78534
approval, committed to trunk.
libgfortran/ChangeLog:
2018-01-07 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/78534
PR fortran/83704
* io/fbuf.c (fbuf_init): Use size_t instead of int for length.
(fbuf_debug): Convert debug output to unsigned long.
(fbuf_reset): Use ptrdiff_t for return value.
(fbuf_alloc): Use size_t for length argument.
(fbuf_flush): Handle large buffers.
(fbuf_flush_list): Likewise.
(fbuf_seek): Use ptrdiff_t for offset and return value.
(fbuf_read): Use size_t for length argument.
(fbuf_getc_refill): Use size_t to match fbuf_read.
* io/fbuf.h (struct fbuf): Use size_t for lengths.
(fbuf_init): Use size_t instead of int for length.
(fbuf_reset): Use ptrdiff_t for return value.
(fbuf_alloc): Use size_t for length argument.
(fbuf_seek): Use ptrdiff_t for offset and return value.
(fbuf_read): Use size_t for length argument.
* io/io.h (read_block_form): Likewise.
(read_block_form4): Likewise.
(write_block): Likewise.
(read_a): Likewise.
(read_a_char4): Likewise.
(read_x): Likewise.
(write_a): Likewise.
(write_a_char4): Likewise.
* io/list_read.c (list_formatted_read_scalar): Use size_t to
handle large buffers.
* io/read.c (read_l): Likewise.
(read_utf8): Likewise.
(read_utf8_char1): Likewise.
(read_default_char1): Likewise.
(read_utf8_char4): Likewise.
(read_default_char4): Likewise.
(read_a): Likewise.
(read_a_char4): Likewise.
(eat_leading_spaces): Likewise.
(next_char): Likewise.
(read_decimal): Likewise.
(read_radix): Likewise.
(read_f): Likewise.
(read_x): Likewise.
* io/transfer.c (read_sf_internal): Likewise.
(read_sf): Likewise.
(read_block_form): Likewise.
(read_block_form4): Likewise.
(write_block): Likewise.
(formatted_transfer_scalar_write): Likewise.
(next_record_w): Likewise.
* io/unix.c (mem_alloc_r): Likewise.
(mem_alloc_r4): Likewise.
(mem_alloc_w): Likewise.
(mem_alloc_w4): Likewise.
(mem_read): Likewise.
(mem_read4): Likewise.
(mem_write): Likewise.
(mem_write4): Likewise.
(open_internal): Likewise.
(open_internal4): Likewise.
* io/unix.h (open_internal): Likewise.
(open_internal4): Likewise.
(mem_alloc_w): Likewise.
(mem_alloc_r): Likewise.
(mem_alloc_w4): Likewise.
(mem_alloc_r4): Likewise.
* io/write.c (write_check_cc): Likewise.
(write_cc): Likewise.
(write_a): Likewise.
(write_a_char4): Likewise.
From-SVN: r256322
2016-10-17 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR fortran/48298
* io/io.h: Move size_used from dtp to unit structure. Add bool
has_size to unit structure.
* read.c (read_x): Use has_size and size_used.
* transfer.c (read_sf_internal,read_sf,read_block_form,
read_block_form4): Likewise.
(data_transfer_init): If parent, initialize the size variables.
(finalize_transfer): Set the size variable using size_used in
gfc_unit. (write_block): Delete bogus/dead code.
* gfortran.dg/dtio_17.f90: New test.
From-SVN: r241294
2014-11-13 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/60324
* configure: Regenerated.
* configure.ac (AM_CFLAGS): Add Werror=vla.
* libgfortran.h (gfc_alloca): Remove macro.
(fc_strdup_notrim): New prototype.
* intrinsics/access.c (access_func): Use fc_strdup rather than
stack allocation.
* intrinsics/chdir.c (chdir_i4_sub): Likewise.
(chdir_i8_sub): Likewise.
* intrinsics/chmod.c (chmod_internal): New function, move logic
here.
(chmod_func): Call chmod_internal.
* intrinsics/env.c (getenv): Use fc_strdup rather than stack
allocation.
(get_environment_variable_i4): Likewise.
* intrinsics/execute_command_line.c (execute_command_line):
Likewise.
* intrinsics/hostnm.c (hostnm_0): New function, use static buffer
rather than VLA.
(hostnm_i4_sub): Call hostnm_0.
(hostnm_i8_sub): Likewise.
(hostnm): Likewise.
* intrinsics/link.c (link_internal): New function, use fc_strdup
rather than stack allocation.
(link_i4_sub): Call link_internal.
(link_i8_sub): Likewise.
(link_i4): Likewise.
(link_i8): Likewise.
* intrinsics/perror.c (perror_sub): Use fc_strdup rather than
stack allocation.
* intrinsics/random.c (random_seed_i4): Use static buffer rather
than VLA, use _Static_assert to make sure it's big enough.
* intrinsics/rename.c (rename_internal): New function, use
fc_strdup rather than stack allocation.
(rename_i4_sub): Call rename_internal.
(rename_i8_sub): Likewise.
(rename_i4): Likewise.
(rename_i8): Likewise.
* intrinsics/stat.c (stat_i4_sub_0): Use fc_strdup rather than
stack allocation.
(stat_i8_sub_0): Likewise.
* intrinsics/symlink.c (symlnk_internal): New function, use
fc_strdup rather than stack allocation.
(symlnk_i4_sub): Call symlnk_internal.
(symlnk_i8_sub): Likewise.
(symlnk_i4): Likewise.
(symlnk_i8): Likewise.
* intrinsics/system.c (system_sub): Use fc_strdup rather than
stack allocation.
* intrinsics/unlink.c (unlink_i4_sub): Likewise.
* io/file_pos.c (READ_CHUNK): Make it a macro rather than variable.
* io/list_read.c (nml_get_obj_data): Use fixed stack buffer, fall
back to xmalloc/free for large sizes.
* io/read.c (read_f): Likewise.
* io/transfer.c (MAX_READ): Make it a macro rather than variable.
(WRITE_CHUNK): Likewise.
* io/write_float.def (write_float): Use fixed stack buffer, fall
back to xmalloc/free for large sizes.
* runtime/string.c (fc_strdup_notrim): New function.
From-SVN: r217480
2014-03-12 Jerry DeLisle <jvdelisle@gcc.gnu>
PR libfortran/38199
* io/read.c (read_decimal): Quickly skip spaces to avoid calls
to next_char.
* io/unit.c (is_trim_ok): New helper function to check various
conditions to see if its OK to trim the internal unit string.
(get_internal_unit): Use LEN_TRIM to shorten selected internal
unit strings for optimizing READ. Enable this optimization for
formatted READ.
* io/list_read.c (finish_list_read): Don't call eat_line for
internal units.
From-SVN: r208528
2013-12-18 Steven G. Kargl <kargl@gcc.gnu.org>
* io/read.c (read_f): Convert assert to runtime error.
2013-12-18 Steven G. Kargl <kargl@gcc.gnu.org>
* gfortran.dg/io_err_1.f90: New test.
From-SVN: r206102
gcc/fortran ChangeLog:
2012-05-14 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/52428
* gfortran.texi: Update _gfortran_set_options documentation.
* invoke.texi: Remove runtime behavior description of
-fno-range-check.
* trans-decl.c (create_main_function): Don't pass the range-check
setting to the library.
libgfortran ChangeLog:
2012-05-14 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/52428
* io/io.h (max_value): Rename to si_max, remove second argument.
* io/list_read.c (convert_integer): Use unsigned types when
parsing the digits, set max value depending on the sign.
* io/read.c (max_value): Rename to si_max, remove second argument,
simplify.
(read_decimal): Set max value depending on sign, always check
overflow.
(read_radix): Calculate max unsigned value directly.
* libgfortran.h (struct compile_options_t): Remove range_check
field.
* runtime/compile_options.c (set_options): Skip handling
options[7].
(init_compile_options): Don't set removed field.
gcc/testsuite ChangeLog:
2012-05-14 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/52428
* gfortran.dg/int_range_io_1.f90: New test.
From-SVN: r187478
2010-07-16 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37077
* io/read.c (read_default_char4): Add support for reading into a
kind-4 character variable from a character(kind=4) internal unit.
* io/io.h (read_block_form4): Add prototype.
* io/unit.c (get_internal_unit): Add call to fbuf_init.
(free_internal_unit): Add call to fbuf_destroy. (get_unit): Fix
whitespace.
* io/transfer.c (read_sf_internal): Use fbuf_alloc to allocate a string
to recieve the wide characters translated to single byte chracters.
(read_block_form): Fix whitespace. (read_block_form4): New function to
read from a character(kind=4) internal unit into a character(kind=4)
variable. (read_block_direct): Fix whitespace. (write_block): Fix
whitespace. (formatted_transfer_scalar_read): Likewise.
(formatted_transfer_scalar_write): Likewise.
* io/write.c (write_character): Add support for list directed write of
a kind=1 character string to a character(kind=4) internal unit.
From-SVN: r162260
2010-07-12 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libfortran/37077
* io/read.c: Fix comment.
* io/io.h (is_char4_unit): New macro.
* io/unit.c (get_internal_unit): Call new function open_internal4.
* io/unix.c (mem_alloc_r4): New function. (mem_alloc_w4): New function.
(mem_read4): New function, temporary stub. (mem_write4): New function.
(open_internal4): New function to set stream pointers to use the new
mem functions.
* io/transfer.c (write_block): Use new mem_alloc_w4 to access internal
units of kind=4.
* io/unix.h: Add prototypes for open_internal4, mem_alloc_w4, and
mem_alloc_r4.
* io/write.c (memset4): New helper function. (memcpy4): New helper
function. (write_default_char4): Use new helper functions.
(write_a): Likewise. (write_l): Likewise. (write_boz): Likewise.
(write_decimal): Likewise. (write_x): Likewise.
(write_integer): Likewise.
* io/write_float.def (output_float): Add code blocks to handle internal
unit kind=4 output utilizing gfc_char4_t pointers. (write_infnan): Use
new helper functions. (OUTPUT_FLOAT_FMT_G): Update this macro likewise.
From-SVN: r162123
2010-06-28 Tobias Burnus <burnus@net-b.de>
PR fortran/43298
* list_read.c (parse_real): Do not pass (..) on for NAN(..).
* read.c (convert_real): Fix comment about NAN/INF.
From-SVN: r161735
