ifcvt: Fix PR104153 and PR104198.

This is a bugfix for r12-6747-gaa8cfe785953a0 which caused an ICE
on or1k (PR104153) and broke SPARC bootstrap (PR104198).

cond_exec_get_condition () returns the jump condition directly and we
now pass it to the backend.  The or1k backend modified the condition
in-place (other backends do that as well) but this modification is not
reverted when the sequence in question is discarded.  Therefore we copy
the RTX instead of using it directly.

The SPARC problem is due to the SPARC backend recreating the initial
condition when being passed a CC comparison.  This causes the sequence
to read from an already overwritten condition operand.  Generally, this
could also happen on other targets.  The workaround is to always first
emit to a temporary.  In a second run of noce_convert_multiple_sets_1
we know which sequences actually require the comparison and will use no
temporaries if all sequences after the current one do not require it.

	PR rtl-optimization/104198
	PR rtl-optimization/104153

gcc/ChangeLog:

	* ifcvt.cc (noce_convert_multiple_sets_1): Copy rtx instead of
	using it directly.  Rework comparison handling and always
	perform a second pass.

gcc/testsuite/ChangeLog:

	* gcc.dg/pr104198.c: New test.

gcc/ifcvt.cc

@@ -3391,7 +3391,11 @@ noce_convert_multiple_sets_1 (struct noce_if_info *if_info,
   rtx cond = noce_get_condition (jump, &cond_earliest, false);
 
   rtx cc_cmp = cond_exec_get_condition (jump);
+  if (cc_cmp)
+    cc_cmp = copy_rtx (cc_cmp);
   rtx rev_cc_cmp = cond_exec_get_condition (jump, /* get_reversed */ true);
+  if (rev_cc_cmp)
+    rev_cc_cmp = copy_rtx (rev_cc_cmp);
 
   rtx_insn *insn;
   int count = 0;
@@ -3515,6 +3519,7 @@ noce_convert_multiple_sets_1 (struct noce_if_info *if_info,
       unsigned cost1 = 0, cost2 = 0;
       rtx_insn *seq, *seq1, *seq2;
       rtx temp_dest = NULL_RTX, temp_dest1 = NULL_RTX, temp_dest2 = NULL_RTX;
+      bool read_comparison = false;
 
       seq1 = try_emit_cmove_seq (if_info, temp, cond,
 				 new_val, old_val, need_cmov,
@@ -3524,10 +3529,41 @@ noce_convert_multiple_sets_1 (struct noce_if_info *if_info,
 	 as well.  This allows the backend to emit a cmov directly without
 	 creating an additional compare for each.  If successful, costing
 	 is easier and this sequence is usually preferred.  */
-      seq2 = try_emit_cmove_seq (if_info, target, cond,
+      seq2 = try_emit_cmove_seq (if_info, temp, cond,
 				 new_val, old_val, need_cmov,
 				 &cost2, &temp_dest2, cc_cmp, rev_cc_cmp);
 
+      /* The backend might have created a sequence that uses the
+	 condition.  Check this.  */
+      rtx_insn *walk = seq2;
+      while (walk)
+	{
+	  rtx set = single_set (walk);
+
+	  if (!set || !SET_SRC (set))
+	    {
+	      walk = NEXT_INSN (walk);
+	      continue;
+	    }
+
+	  rtx src = SET_SRC (set);
+
+	  if (XEXP (set, 1) && GET_CODE (XEXP (set, 1)) == IF_THEN_ELSE)
+	    ; /* We assume that this is the cmove created by the backend that
+		 naturally uses the condition.  Therefore we ignore it.  */
+	  else
+	    {
+	      if (reg_mentioned_p (XEXP (cond, 0), src)
+		  || reg_mentioned_p (XEXP (cond, 1), src))
+		{
+		  read_comparison = true;
+		  break;
+		}
+	    }
+
+	  walk = NEXT_INSN (walk);
+	}
+
       /* Check which version is less expensive.  */
       if (seq1 != NULL_RTX && (cost1 <= cost2 || seq2 == NULL_RTX))
 	{
@@ -3540,6 +3576,8 @@ noce_convert_multiple_sets_1 (struct noce_if_info *if_info,
 	{
 	  seq = seq2;
 	  temp_dest = temp_dest2;
+	  if (!second_try && read_comparison)
+	    *last_needs_comparison = count;
 	}
       else
 	{
@@ -3558,6 +3596,12 @@ noce_convert_multiple_sets_1 (struct noce_if_info *if_info,
       unmodified_insns->safe_push (insn);
     }
 
+  /* Even if we did not actually need the comparison, we want to make sure
+     to try a second time in order to get rid of the temporaries.  */
+  if (*last_needs_comparison == -1)
+    *last_needs_comparison = 0;
+
+
   return true;
 }
 

gcc/testsuite/gcc.dg/pr104198.c

@@ -0,0 +1,36 @@
+/* Make sure if conversion for two instructions does not break
+   anything (if it runs).  */
+
+/* { dg-do run } */
+/* { dg-options "-O2 -std=c99" } */
+
+#include <limits.h>
+#include <assert.h>
+
+__attribute__ ((noinline))
+int foo (int *a, int n)
+{
+  int min = 999999;
+  int bla = 0;
+  for (int i = 0; i < n; i++)
+    {
+      if (a[i] < min)
+	{
+	  min = a[i];
+	  bla = 1;
+	}
+    }
+
+  if (bla)
+    min += 1;
+  return min;
+}
+
+int main()
+{
+  int a[] = {2, 1, -13, INT_MAX, INT_MIN, 0};
+
+  int res = foo (a, sizeof (a) / sizeof (a[0]));
+
+  assert (res == (INT_MIN + 1));
+}