[Darwin] Fix PR87030 and tidy config fragments.

This is about 32/64b host and multilib support across the range of Darwin
systems.

Prior to Darwin8 (OS X 10.4), the toolchains support only PowerPC and only 32b.

On Darwin8 it is possible to target a 64b multilib, but with support limited
to a few of the main libraries on the system (not a recommended configuration).

From Darwin9 to Darwin17 (OSX 10.5 to 10.13) it is possible to have either
32 or 64b hosted toolchains, with support for a 64 or 32b multilib respectively.

On Darwin9 the kernel is 32b, but with support for 64b executables, so it's
conventional to build a 32b host toolchain supporting a 64b multilib.  However
this is not enforced (merely a convention).

There is also some platform hardware supporting Darwin10/11 which is only 32b
and for which the same situation applies.  However, from Darwin10 to Darwin17,
the majority of platform hardware supports a 64b kernel and it's conventional
to build a 64b host toolchain with support for a 32b multilib.

On/from Darwin18 (OS X 10.14), the development headers (in the SDK) no longer
expose the interfaces for the 32b multilib support (although sufficient runtime
support remains installed that the testsuite can be run for a 32b multilib).

The PR is raised against this latter situation since the absence of exposed
interfaces causes a 'default' bootstrap fail regardless of the availability of
the runtimes.  Given the number of permutations, I felt it warranted a general
solution, especially since the current scheme of target headers and t-make
fragments has become somewhat messy.

The changes here enforce the single 32b PowerPC multilib for Darwin < 8 and the
single X86 64b multilib for Darwin >= 18.  This means that there is no longer
any need to configure Darwin18+ '--disable-multilib', but also that if you want
to use the ability to continue to test the compiler's 32b multilib there, you
need to make a configuration targeting an earlier OS version (and using the
SDK from that).

gcc/

	PR bootstrap/87030
	* config.gcc (*-*-darwin*): Don't include CPU t-darwin here.
	(i[34567]86-*-darwin*): Adjust to use biarch files. Produce
	an error message if i686-darwin configuration is attempted for
	Darwin >= 18.
	(x86_64-*-darwin*): Switch to single multilib for Darwin >= 18.
	(powerpc-*-darwin*): Use biarch files where needed.
	(powerpc64-*-darwin*): Likewise.
	* config/i386/darwin.h (REAL_LIBGCC_SPEC): Move to new biarch file.
	(DARWIN_ARCH_SPEC, DARWIN_SUBARCH_SPEC): Revise for default single
	arch case.
	* config/i386/darwin32-biarch.h: New.
	* config/i386/darwin64.h: Rename.
	* gcc/config/i386/darwin64-biarch.h: To this.
	* config/i386/t-darwin: Rename.
	* gcc/config/i386/t-darwin32-biarch: To this.
	* config/i386/t-darwin64: Rename.
	* gcc/config/i386/t-darwin64-biarch: To this.
	* config/rs6000/darwin32-biarch.h: New.
	* config/rs6000/darwin64.h: Rename.
	* config/rs6000/darwin64-biarch.h: To this.
	(DARWIN_ARCH_SPEC, DARWIN_SUBARCH_SPEC): Revise for default single
	arch case.
	* config/rs6000/t-darwin8: Rename.
	* config/rs6000/t-darwin32-biarch: To this.
	* config/rs6000/t-darwin64 Rename.
	* config/rs6000/t-darwin64-biarch: To this.

From-SVN: r273746
This commit is contained in:
Iain Sandoe 2019-07-23 20:31:26 +00:00 committed by Iain Sandoe
parent d8e54c6203
commit 000a002072
11 changed files with 127 additions and 12 deletions

View file

@ -1,3 +1,33 @@
2019-07-23 Iain Sandoe <iain@sandoe.co.uk>
PR bootstrap/87030
* config.gcc (*-*-darwin*): Don't include CPU t-darwin here.
(i[34567]86-*-darwin*): Adjust to use biarch files. Produce
an error message if i686-darwin configuration is attempted for
Darwin >= 18.
(x86_64-*-darwin*): Switch to single multilib for Darwin >= 18.
(powerpc-*-darwin*): Use biarch files where needed.
(powerpc64-*-darwin*): Likewise.
* config/i386/darwin.h (REAL_LIBGCC_SPEC): Move to new biarch file.
(DARWIN_ARCH_SPEC, DARWIN_SUBARCH_SPEC): Revise for default single
arch case.
* config/i386/darwin32-biarch.h: New.
* config/i386/darwin64.h: Rename.
* gcc/config/i386/darwin64-biarch.h: To this.
* config/i386/t-darwin: Rename.
* gcc/config/i386/t-darwin32-biarch: To this.
* config/i386/t-darwin64: Rename.
* gcc/config/i386/t-darwin64-biarch: To this.
* config/rs6000/darwin32-biarch.h: New.
* config/rs6000/darwin64.h: Rename.
* config/rs6000/darwin64-biarch.h: To this.
(DARWIN_ARCH_SPEC, DARWIN_SUBARCH_SPEC): Revise for default single
arch case.
* config/rs6000/t-darwin8: Rename.
* config/rs6000/t-darwin32-biarch: To this.
* config/rs6000/t-darwin64 Rename.
* config/rs6000/t-darwin64-biarch: To this.
2019-07-23 Martin Sebor <msebor@redhat.com>
* configure.ac (ACX_PROG_CXX_WARNING_OPTS): Revert r273311.

View file

@ -139,9 +139,6 @@ along with GCC; see the file COPYING3. If not see
" ASM_OPTIONS " -force_cpusubtype_ALL \
%{static}" ASM_MMACOSX_VERSION_MIN_SPEC
#define DARWIN_ARCH_SPEC "%{m64:x86_64;:i386}"
#define DARWIN_SUBARCH_SPEC DARWIN_ARCH_SPEC
#undef ENDFILE_SPEC
#define ENDFILE_SPEC \
"%{Ofast|ffast-math|funsafe-math-optimizations:crtfastmath.o%s} \
@ -149,12 +146,15 @@ along with GCC; see the file COPYING3. If not see
%{mpc64:crtprec64.o%s} \
%{mpc80:crtprec80.o%s}" TM_DESTRUCTOR
#define DARWIN_ARCH_SPEC "x86_64"
/* We default to x86_64 for single-arch builds, bi-arch overrides. */
#undef SUBTARGET_EXTRA_SPECS
#define SUBTARGET_EXTRA_SPECS \
DARWIN_EXTRA_SPECS \
{ "darwin_arch", DARWIN_ARCH_SPEC }, \
{ "darwin_arch", DARWIN_ARCH_SPEC }, \
{ "darwin_crt2", "" }, \
{ "darwin_subarch", DARWIN_SUBARCH_SPEC },
{ "darwin_subarch", DARWIN_ARCH_SPEC },
/* The Darwin assembler mostly follows AT&T syntax. */
#undef ASSEMBLER_DIALECT

View file

@ -0,0 +1,32 @@
/* Target definitions for i386 running Darwin.
Copyright (C) 2019 Free Software Foundation, Inc.
Contributed by Apple Computer Inc.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3, or (at your option)
any later version.
GCC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING3. If not see
<http://www.gnu.org/licenses/>. */
#undef DARWIN_ARCH_SPEC
#define DARWIN_ARCH_SPEC "%{m64:x86_64;:i386}"
#undef DARWIN_SUBARCH_SPEC
#define DARWIN_SUBARCH_SPEC DARWIN_ARCH_SPEC
#undef SUBTARGET_EXTRA_SPECS
#define SUBTARGET_EXTRA_SPECS \
DARWIN_EXTRA_SPECS \
{ "darwin_arch", DARWIN_ARCH_SPEC }, \
{ "darwin_crt2", "" }, \
{ "darwin_subarch", DARWIN_SUBARCH_SPEC },

View file

@ -117,11 +117,10 @@ extern int darwin_emit_picsym_stub;
%<faltivec %<fno-altivec " \
DARWIN_CC1_SPEC
#define DARWIN_ARCH_SPEC "%{m64:ppc64;:ppc}"
/* Default to PPC for single arch builds. */
#define DARWIN_ARCH_SPEC "ppc"
#define DARWIN_SUBARCH_SPEC " \
%{m64: ppc64} \
%{!m64: \
%{mcpu=601:ppc601; \
mcpu=603:ppc603; \
mcpu=603e:ppc603; \
@ -136,7 +135,7 @@ extern int darwin_emit_picsym_stub;
mcpu=970:ppc970; \
mcpu=power4:ppc970; \
mcpu=G5:ppc970; \
:ppc}}"
:ppc}"
/* We need to jam the crt to 10.5 for 10.6 (Rosetta) use. */
#undef DARWIN_CRT1_SPEC

View file

@ -0,0 +1,49 @@
/* Target definitions for PowerPC running Darwin (Mac OS X).
Copyright (C) 2006-2019 Free Software Foundation, Inc.
Contributed by Apple Computer Inc.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published
by the Free Software Foundation; either version 3, or (at your
option) any later version.
GCC is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License for more details.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING3. If not see
<http://www.gnu.org/licenses/>. */
#undef DARWIN_ARCH_SPEC
#define DARWIN_ARCH_SPEC "%{m64:ppc64;:ppc}"
#undef DARWIN_SUBARCH_SPEC
#define DARWIN_SUBARCH_SPEC " \
%{m64: ppc64} \
%{!m64: \
%{mcpu=601:ppc601; \
mcpu=603:ppc603; \
mcpu=603e:ppc603; \
mcpu=604:ppc604; \
mcpu=604e:ppc604e; \
mcpu=740:ppc750; \
mcpu=750:ppc750; \
mcpu=G3:ppc750; \
mcpu=7400:ppc7400; \
mcpu=G4:ppc7400; \
mcpu=7450:ppc7450; \
mcpu=970:ppc970; \
mcpu=power4:ppc970; \
mcpu=G5:ppc970; \
:ppc}}"
#undef SUBTARGET_EXTRA_SPECS
#define SUBTARGET_EXTRA_SPECS \
DARWIN_EXTRA_SPECS \
{ "darwin_arch", DARWIN_ARCH_SPEC }, \
{ "darwin_crt2", DARWIN_CRT2_SPEC }, \
{ "darwin_subarch", DARWIN_SUBARCH_SPEC },

View file

@ -1,4 +1,4 @@
/* Target definitions for PowerPC running Darwin (Mac OS X).
/* Target definitions for PowerPC64 running Darwin (Mac OS X).
Copyright (C) 2006-2019 Free Software Foundation, Inc.
Contributed by Apple Computer Inc.
@ -25,8 +25,13 @@
#undef DARWIN_ARCH_SPEC
#define DARWIN_ARCH_SPEC "%{m32:ppc;:ppc64}"
/* Actually, there's really only 970 as an active option. */
#undef DARWIN_SUBARCH_SPEC
#define DARWIN_SUBARCH_SPEC DARWIN_ARCH_SPEC
#undef DARWIN_CRT2_SPEC
#define DARWIN_CRT2_SPEC ""
#undef SUBTARGET_EXTRA_SPECS
#define SUBTARGET_EXTRA_SPECS \
DARWIN_EXTRA_SPECS \
{ "darwin_arch", DARWIN_ARCH_SPEC }, \
{ "darwin_crt2", "" }, \
{ "darwin_subarch", DARWIN_SUBARCH_SPEC },