* lisp/emacs-lisp/bytecomp.el (byte-compile-make-closure):
Use the supplied doc string if it's a literal; fall back to the old
slow way of building a closure otherwise.
Simplify closure creation by calling a single function at run time
instead of putting it together from small pieces. This is faster
(by about a factor 2), takes less space on disk and in memory, and
makes internal functions somewhat readable in disassembly listings again.
This is done by creating a prototype function at compile-time whose
closure variables are placeholder values V0, V1... which can be seen
in the disassembly. The prototype is then cloned at run time using
the new make-closure function that replaces the placeholders with
the actual closure variables.
* lisp/emacs-lisp/bytecomp.el (byte-compile-make-closure):
Generate call to make-closure from a prototype function.
* src/alloc.c (Fmake_closure): New function.
(syms_of_alloc): Defsubr it.
* src/data.c (syms_of_data): Defsym byte-code-function-p.
* doc/lispref/commands.texi (Using Interactive): Document the
extended `interactive' form.
* doc/lispref/loading.texi (Autoload): Document list-of-modes
form.
* lisp/emacs-lisp/autoload.el (make-autoload): Pick the list of
modes from `interactive' out of the functions.
* lisp/emacs-lisp/bytecomp.el (byte-compile-lambda): Allow for the
extended `interactive' form.
* src/callint.c (Finteractive): Document the extended form.
* src/data.c (Finteractive_form): Return the interactive form in
the old format (even when there's an extended `interactive') to
avoid having other parts of Emacs be aware of this.
(Fcommand_modes): New defun.
* src/emacs-module.c (GCALIGNED_STRUCT): Allow for modules to
return command modes.
* src/lisp.h: New function module_function_command_modes.
The recent change in macroexp triggered a cyclic dependency error
during eager macroexpansion when neither `bytecomp` nor `byte-opt` had
been byte-compiled yet. This fixes it by moving the offending
function to macroexp.el.
* lisp/emacs-lisp/macroexp.el (macroexp--unfold-lambda): Move from
byte-opt.el and rename.
(macroexp--expand-all): Use it.
* lisp/emacs-lisp/byte-opt.el (byte-compile-unfold-lambda): Move to
macroexp.el.
(byte-compile-inline-expand, byte-optimize-form-code-walker):
* lisp/emacs-lisp/bytecomp.el (byte-compile-form):
Use `macroexp--unfold-lambda` instead.
* lisp/emacs-lisp/eieio-core.el (eieio-defclass-autoload): Try to make
the wording of the warning about the obsoleted variable less confusing.
* lisp/emacs-lisp/bytecomp.el (byte-compile-check-variable): Don't
warn for lexical variables (Bug#39169). Fix spurious `or'.
* test/lisp/emacs-lisp/bytecomp-tests.el
(bytecomp/warn-obsolete-variable-bound\.el): New test.
* test/lisp/emacs-lisp/bytecomp-resources/warn-obsolete-variable-bound.el:
New file.
* lisp/emacs-lisp/bytecomp.el (byte-compile-file): Don’t fail if
target filename doesn’t contain a directory name.
* test/lisp/emacs-lisp/bytecomp-tests.el
(bytecomp-tests--target-file-no-directory): New unit test.
See Bug#44631. While testing for a readonly output directory has
slightly different semantics, in practice they should cover cases
where Emacs is sandboxed and can only write to the destination file,
not its directory.
* lisp/emacs-lisp/bytecomp.el (byte-compile-file): Handle the case
where the output directory is not writable.
* test/lisp/emacs-lisp/bytecomp-tests.el
(bytecomp-tests--not-writable-directory)
(bytecomp-tests--dest-mountpoint): New unit tests.
(byte-compile--default-dest-file): New function, extracted from
byte-compile-dest-file.
(byte-compile-dest-file): Use it.
(byte-compile-dest-file-function): Give it a non-nil default value.
(byte-recompile-file, byte-compile-file): Handle a nil return value
from `byte-compile-dest-file`.
* lisp/progmodes/elisp-mode.el (elisp-flymake--batch-compile-for-flymake):
Tell the compiler not to write the result, instead of writing it to
a dummy temp file.
* lisp/emacs-lisp/bytecomp.el (byte-compile-warning-types)
(byte-compile-warnings, byte-compile-cl-file-p)
(byte-compile-eval, byte-compile-eval-before-compile)
(byte-compile-arglist-warn, byte-compile-find-cl-functions)
(byte-compile-cl-warn, displaying-byte-compile-warnings)
(byte-compile-file-form-require, byte-compile-form): Remove all
specific cl.el warnings, as that library is now obsolete. The
regular obsoletion warnings are sufficiently discouraging.
* lisp/emacs-lisp/advice.el (ad-compile-function): Don't try to
silence the now removed warning.
* doc/lispref/tips.texi (Coding Conventions):
* doc/misc/cl.texi (Organization): Make recommendation to not use
cl.el and cl-compat.el stronger.
* lisp/obsolete/cl.el: Make alias help say that they are obsolete.
* lisp/obsolete/cl-compat.el (build-klist, safe-idiv)
(pair-with-newsyms): Silence byte-compiler.
* lisp/emacs-lisp/bytecomp.el (byte-compile-file): Bind
`byte-compiler-error-flag' instead of setting it (bug#41065).
This fixes a problem of "leaking" the flag when compiling
something that then compiles something that errors out (i.e., an
"inner" compile).
* lisp/progmodes/dcl-mode.el (dcl-mode):
* lisp/progmodes/idlw-complete-structtag.el: Recommend
with-eval-after-load instead of load-hooks.
* lisp/calc/calc-ext.el (calc-ext-load-hook):
* lisp/emacs-lisp/bytecomp.el (bytecomp-load-hook):
* lisp/emacs-lisp/cl-extra.el (cl-extra-load-hook):
* lisp/emacs-lisp/cl-macs.el (cl-macs-load-hook):
* lisp/emacs-lisp/cl-seq.el (cl-seq-load-hook):
* lisp/gnus/message.el (message-load-hook):
* lisp/gnus/nnheader.el (nnheader-load-hook):
* lisp/gnus/nnmail.el (nnmail-load-hook):
* lisp/progmodes/dcl-mode.el (dcl-mode-load-hook):
* lisp/textmodes/tex-mode.el (tex-mode-load-hook):
* lisp/whitespace.el (whitespace-load-hook): Obsolete for
with-eval-after-load. Note that these variables are never declared,
but the byte-compiler will still warn about them if used.
Find lexical use of variables that are dynamically declared in other
files by recording 'defvar' declarations in files that can be read
in by the compiler in a second compilation. This is particularly
useful when converting code to use lexical-binding.
The facility is controlled by setting environment variables:
EMACS_GENERATE_DYNVARS -- set to non-empty to generate a .dynvars file
corresponding to each .elc.
EMACS_DYNVARS_FILE -- set to the name of a .dynvars file to use
as defvar information during compilation,
enabling the new warnings.
* lisp/emacs-lisp/bytecomp.el (byte-compile--known-dynamic-vars)
(byte-compile--seen-defvars): New variables.
(byte-compile-warning-types): Add lexical-dynamic warning.
(byte-compile--load-dynvars, byte-compile--warn-lexical-dynamic):
New functions.
* lisp/emacs-lisp/bytecomp.el (byte-compile-file, byte-compile--declare-var)
(byte-compile-lambda, byte-compile-bind): Add dynamic variable loads,
dumps and checks.
* doc/lispref/variables.texi (Converting to Lexical Binding): Document.
This bug affected compilation of
(cond ((member '(some list) variable) ...) ...)
While equal is symmetric, member is not; in the latter case the
arguments must be a variable and a constant list, in that order.
Reported by Ikumi Keita.
* lisp/emacs-lisp/bytecomp.el (byte-compile--cond-switch-prefix):
Don't treat equality and member predicates in the same way; only
the former are symmetric in their arguments.
* test/lisp/emacs-lisp/bytecomp-tests.el
(byte-opt-testsuite-arith-data): Add test cases.
* lisp/emacs-lisp/byte-opt.el (byte-optimize-associative-math)
(byte-optimize-min-max): Transform 3-arg min/max call into two 2-arg
calls, which is faster.
* lisp/emacs-lisp/bytecomp.el (byte-compile-associative): Rename to...
(byte-compile-variadic-numeric): ...this function and simplify,
fixing incorrect comments. The 3-arg strength reduction is now
always done in the optimisers and is no longer needed here.
(byte-compile-min-max): New function.
(byte-compile-minus): Simplify, remove incorrect comment, and use
byte-compile-variadic-numeric.
(byte-compile-quo): Simplify and fix comment.
* lisp/emacs-lisp/bytecomp.el (byte-compile-associative):
Translate numerical identity expressions, such as (+ x) and (* x),
into (* x 1) since the previous translation (+ x 0) gets it wrong
for x = -0.0.
* test/lisp/emacs-lisp/bytecomp-tests.el
(byte-opt-testsuite-arith-data): Add test cases.
The only effect of this change is to get rid of some unnecessary
"assignment to free variable" warnings.
* lisp/emacs-lisp/bytecomp.el (byte-compile-make-local-variable): New
function.
Stash the major version of the compiling Emacs such that the loading
Emacs can later detect when loading a file compiled by a too-new Emacs.
(byte-compile-fix-header): Remove.
(byte-compile-from-buffer): Don't call it any more.
(byte-compile-insert-header): Stash the emacs-major-version in it.
Don't leave space for `byte-compile-fix-header`.
The 'substring' byte op was not emitted, apparently by mistake. Fix.
Suggested by Mark Oteiza <mvoteiza@udel.edu>.
* lisp/emacs-lisp/bytecomp.el (byte-defop-compiler): Add '1-3' clause.
(byte-compile-one-to-three-args): New.
* lisp/emacs-lisp/byte-opt.el (byte-compile-side-effect-free-ops):
Add 'byte-substring'.
* test/lisp/emacs-lisp/bytecomp-tests.el
(byte-opt-testsuite-arith-data): Test 'substring'.
This avoids some race conditions (Bug#39683). E.g., if some other
program changes a file to a symlink between the time Emacs creates
the file and the time it changes the file’s permissions, using the
new flag prevents Emacs from inadvertently changing the
permissions of a victim in some completely unrelated directory.
* admin/merge-gnulib (GNULIB_MODULES): Add fchmodat.
* doc/lispref/files.texi (Testing Accessibility, Changing Files):
* doc/lispref/os.texi (File Notifications):
* etc/NEWS:
Adjust documentation accordingly.
* lib/chmodat.c, lib/fchmodat.c, lib/lchmod.c, m4/fchmodat.m4:
* m4/lchmod.m4: New files, copied from Gnulib.
* lib/gnulib.mk.in: Regenerate.
* lisp/dired-aux.el (dired-do-chmod):
* lisp/doc-view.el (doc-view-make-safe-dir):
* lisp/emacs-lisp/autoload.el (autoload--save-buffer):
* lisp/emacs-lisp/bytecomp.el (byte-compile-file):
* lisp/eshell/em-pred.el (eshell-pred-file-mode):
* lisp/files.el (backup-buffer-copy, copy-directory):
* lisp/gnus/mail-source.el (mail-source-movemail):
* lisp/gnus/mm-decode.el (mm-display-external):
* lisp/gnus/nnmail.el (nnmail-write-region):
* lisp/net/tramp-adb.el (tramp-adb-handle-file-local-copy)
(tramp-adb-handle-write-region):
* lisp/net/tramp-sh.el (tramp-do-copy-or-rename-file-directly):
* lisp/net/tramp-sudoedit.el (tramp-sudoedit-handle-write-region):
* lisp/net/tramp.el (tramp-handle-write-region)
(tramp-make-tramp-temp-file):
* lisp/server.el (server-ensure-safe-dir):
* lisp/url/url-util.el (url-make-private-file):
When getting or setting file modes, avoid following symbolic links
when the file is not supposed to be a symbolic link.
* lisp/doc-view.el (doc-view-make-safe-dir):
Omit no-longer-needed separate symlink test.
* lisp/gnus/gnus-util.el (gnus-set-file-modes):
* lisp/net/tramp.el (tramp-handle-file-modes):
* lisp/net/tramp-gvfs.el (tramp-gvfs-handle-set-file-modes):
* src/fileio.c (symlink_nofollow_flag): New function.
(Ffile_modes, Fset_file_modes):
Support an optional FLAG arg. All C callers changed.
* lisp/net/ange-ftp.el (ange-ftp-set-file-modes):
* lisp/net/tramp-adb.el (tramp-adb-handle-set-file-modes):
* lisp/net/tramp-sh.el (tramp-sh-handle-set-file-modes):
* lisp/net/tramp-smb.el (tramp-smb-handle-set-file-modes):
* lisp/net/tramp-sudoedit.el (tramp-sudoedit-handle-set-file-modes):
Accept an optional FLAG arg that is currently ignored,
and add a FIXME comment for it.
* m4/gnulib-comp.m4: Regenerate.
According to the GNU coding standards (info "(standards) Errors"):
> If you want to mention the column number, use one of these formats:
> SOURCE-FILE-NAME:LINENO:COLUMN: MESSAGE
> SOURCE-FILE-NAME:LINENO.COLUMN: MESSAGE
* lisp/emacs-lisp/bytecomp.el (byte-compile-warning-prefix): Add space
before message in byte compiler warnings to comply with the GNU coding
standards. (Bug#18969)
They have not been generated by the byte-compiler since Emacs 25.
* lisp/emacs-lisp/bytecomp.el (byte-catch, byte-condition-case):
* src/bytecode.c (BYTE_CODES, exec_byte_code):
Mark as obsolete (since Emacs 25; they were still generated in 24.4).
186152ba40 Pacify gcc -Wunused-function on Ubuntu 18.04.3
4cd143aded Fix copyright years by hand
365e01cc9f Update copyright year to 2020
cd2c156163 ; * etc/NEWS: Make the description of XDG fallback more ac...
# Conflicts:
# etc/NEWS
# etc/refcards/ru-refcard.tex
* lisp/emacs-lisp/bytecomp.el (byte-compile-get-constant):
Use eql for looking up constants instead of eq, allowing
for bignum and flonum deduplication (bug#38708).
Add some hints to the message for byte compiler free & unused variable
warnings, and 'void-variable' errors where the variable has confusable
quote characters in it.
* lisp/help.el (uni-confusables), uni-confusables-regexp): New
constants.
(help-command-error-confusable-suggestions): New function, added to
`command-error-function'.
(help-uni-confusable-suggestions): New function.
* lisp/emacs-lisp/bytecomp.el (byte-compile-variable-ref):
* lisp/emacs-lisp/cconv.el (cconv--analyze-use): Use it.
* lisp/emacs-lisp/lisp-mode.el
(lisp--match-confusable-symbol-character): New function.
(lisp-fdefs): Use it to fontify confusable characters with
font-lock-warning-face when they occur in symbol names.
* doc/lispref/modes.texi (Faces for Font Lock):
* doc/lispref/objects.texi (Basic Char Syntax): Recommend backslash
escaping of confusable characters, and mention new fontification.
* etc/NEWS: Announce the new fontification behavior.
* test/lisp/emacs-lisp/lisp-mode-tests.el (lisp-fontify-confusables):
New test.
* lisp/emacs-lisp/bytecomp.el (emacs-lisp-compilation-mode-map):
No need to use set-keymap-parent here; `define-derived-mode' will
do that automatically.
* lisp/emacs-lisp/bytecomp.el (emacs-lisp-compilation-recompile):
New command (bug#4516).
(emacs-lisp-compilation--current-file)
(emacs-lisp-compilation-mode-map): New variables with new `g'
binding.
(byte-compile-log-file): Set variable so that `g' can recompile it.
