Expunge "allow" + infinitive without direct object from source and doc.

Do the same for "permit", "enable", and "prevent".

* doc/emacs/mule.texi:
* doc/lispref/control.texi:
* doc/lispref/display.texi:
* doc/lispref/frames.texi:
* doc/lispref/functions.texi:
* doc/lispref/nonascii.texi:
* doc/lispref/streams.texi:
* doc/lispref/windows.texi:
* doc/misc/dbus.texi:
* doc/misc/eww.texi:
* doc/misc/flymake.texi:
* doc/misc/octave-mode.texi:
* doc/misc/org.texi:
* doc/misc/reftex.texi:
* doc/misc/tramp.texi:
* doc/misc/wisent.texi:
* etc/NEWS:
* lisp/autorevert.el:
* lisp/cedet/mode-local.el:
* lisp/cedet/semantic/senator.el:
* lisp/cedet/semantic/wisent.el:
* lisp/dos-fns.el:
* lisp/frameset.el:
* lisp/gnus/gnus-agent.el:
* lisp/gnus/mm-util.el:
* lisp/international/characters.el:
* lisp/ldefs-boot.el:
* lisp/mail/mailclient.el:
* lisp/man.el:
* lisp/mh-e/mh-search.el:
* lisp/net/tramp-cmds.el:
* lisp/net/tramp-gvfs.el:
* lisp/org/org-crypt.el:
* lisp/org/org-element.el:
* lisp/org/org-feed.el:
* lisp/org/org.el:
* lisp/org/ox-ascii.el:
* lisp/org/ox-icalendar.el:
* lisp/org/ox-publish.el:
* lisp/org/ox.el:
* lisp/play/gamegrid.el:
* lisp/play/gomoku.el:
* lisp/progmodes/antlr-mode.el:
* lisp/progmodes/python.el:
* lisp/progmodes/vhdl-mode.el:
* lisp/strokes.el:
* lisp/textmodes/ispell.el:
* lisp/tree-widget.el:
* lisp/vc/pcvs.el:
* lisp/window.el:
* src/lisp.h:
* src/w32.c:
* src/w32heap.c:
* src/w32term.c:
* src/window.c:
* src/xfaces.c:

Replace solecisms like "This allow to do something" with a correct
alternative, such as "This allow you to do something", "This allows
something to be done" or "This allows the doing of something".

doc/emacs/mule.texi

@@ -1216,7 +1216,7 @@ using the internal Emacs representation.
   When Emacs runs on MS-Windows versions that are descendants of the
 NT family (Windows 2000, XP, Vista, Windows 7, and Windows 8), the
 value of @code{file-name-coding-system} is largely ignored, as Emacs
-by default uses APIs that allow to pass Unicode file names directly.
+by default uses APIs that allow passing Unicode file names directly.
 By contrast, on Windows 9X, file names are encoded using
 @code{file-name-coding-system}, which should be set to the codepage
 (@pxref{Coding Systems, codepage}) pertinent for the current system

doc/lispref/control.texi

@@ -302,8 +302,8 @@ predicate conditions that compare values of expressions against
 specific values known and written in advance.  However, sometimes it
 is useful to select alternatives based on more general conditions that
 distinguish between broad classes of values.  The @code{pcase} macro
-allows to choose between alternatives based on matching the value of
-an expression against a series of patterns.  A pattern can be a
+allows you to choose between alternatives based on matching the value
+of an expression against a series of patterns.  A pattern can be a
 literal value (comparison to literal values is what @code{cond} does),
 or it can be a more general description of the expected structure of
 the expression's value.
@@ -350,7 +350,7 @@ when called with the value being matched as its argument.
 @var{predfun} can be one of the possible forms described below.
 @item (guard @var{boolean-expression})
 Matches if @var{boolean-expression} evaluates to non-@code{nil}.  This
-allows to include in a UPattern boolean conditions that refer to
+allows you to include in a UPattern boolean conditions that refer to
 symbols bound to values (including the value being matched) by
 previous UPatterns.  Typically used inside an @code{and} UPattern, see
 below.  For example, @w{@code{(and x (guard (< x 10)))}} is a pattern
@@ -358,7 +358,7 @@ which matches any number smaller than 10 and let-binds the variable
 @code{x} to that number.
 @item (let @var{upattern} @var{expression})
 Matches if the specified @var{expression} matches the specified
-@var{upattern}.  This allows to match a pattern against the value of
+@var{upattern}.  This allows matching a pattern against the value of
 an @emph{arbitrary} expression, not just the expression that is the
 first argument to @code{pcase}.  (It is called @code{let} because
 @var{upattern} can bind symbols to values using the @var{symbol}
@@ -407,7 +407,7 @@ Here's an illustrative example of using UPatterns:
   (code           (message "Unknown return code %S" code)))
 @end example
 
-The QPatterns are more powerful.  They allow to match the value of the
+The QPatterns are more powerful.  They allow matching the value of the
 @var{expression} that is the first argument of @code{pcase} against
 specifications of its @emph{structure}.  For example, you can specify
 that the value must be a list of 2 elements whose first element is a

doc/lispref/display.texi

@@ -4303,7 +4303,7 @@ divider ends above the bottom divider.
    Dividers can be dragged with the mouse and are therefore useful for
 adjusting the sizes of adjacent windows with the mouse.  They also serve
 to visually set apart adjacent windows when no scroll bars or mode lines
-are present.  The following three faces allow to customize the
+are present.  The following three faces allow the customization of the
 appearance of dividers:
 
 @table @code

doc/lispref/frames.texi

@@ -2403,8 +2403,8 @@ The resulting mouse position is not constrained to the native frame of
 The return value is not significant.
 @end defun
 
-On a graphical terminal the following two functions allow to retrieve
-and set the absolute position of the mouse cursor.
+On a graphical terminal the following two functions allow the absolute
+position of the mouse cursor to be retrieved and set.
 
 @defun mouse-absolute-pixel-position
 This function returns a cons cell (@var{x} . @var{y}) of the coordinates
@@ -2426,7 +2426,7 @@ This predicate function returns non-@code{nil} if the mouse pointer
 displayed on @var{frame} is visible; otherwise it returns @code{nil}.
 @var{frame} omitted or @code{nil} means the selected frame.  This is
 useful when @code{make-pointer-invisible} is set to @code{t}: it
-allows to know if the pointer has been hidden.
+allows you to know if the pointer has been hidden.
 @xref{Mouse Avoidance,,,emacs, The Emacs Manual}.
 @end defun
 

doc/lispref/functions.texi

@@ -1248,7 +1248,7 @@ Parent type: @code{array}.
 @item font-object
 @end table
 
-The optional @var{qualifier} allows to combine several applicable
+The optional @var{qualifier} allows combining several applicable
 methods.  If it is not present, the defined method is a @dfn{primary}
 method, responsible for providing the primary implementation of the
 generic function for the specialized arguments.  You can also define
@@ -1270,8 +1270,8 @@ The most specific of such methods will be run before any other method.
 Such methods normally use @code{cl-call-next-method}, described below,
 to invoke the other auxiliary or primary methods.
 @item :extra @var{string}
-This allows to add more methods, distinguished by @var{string}, for
-the same specializers and qualifiers.
+This allows you to add more methods, distinguished by @var{string},
+for the same specializers and qualifiers.
 @end table
 @end defmac
 

doc/lispref/nonascii.texi

@@ -1338,9 +1338,9 @@ operates on the contents of @var{string} instead of bytes in the buffer.
 @cindex null bytes, and decoding text
 @defvar inhibit-null-byte-detection
 If this variable has a non-@code{nil} value, null bytes are ignored
-when detecting the encoding of a region or a string.  This allows to
-correctly detect the encoding of text that contains null bytes, such
-as Info files with Index nodes.
+when detecting the encoding of a region or a string.  This allows the
+encoding of text that contains null bytes to be correctly detected,
+such as Info files with Index nodes.
 @end defvar
 
 @defvar inhibit-iso-escape-detection

doc/lispref/streams.texi

@@ -343,10 +343,10 @@ shared structures.  @xref{Circular Objects}.  Its default value is
 When reading or writing from the standard input/output streams of the
 Emacs process in batch mode, it is sometimes required to make sure any
 arbitrary binary data will be read/written verbatim, and/or that no
-translation of newlines to or from CR-LF pairs are performed.  This
+translation of newlines to or from CR-LF pairs is performed.  This
 issue does not exist on Posix hosts, only on MS-Windows and MS-DOS@.
-The following function allows to control the I/O mode of any standard
-stream of the Emacs process.
+The following function allows you to control the I/O mode of any
+standard stream of the Emacs process.
 
 @defun set-binary-mode stream mode
 Switch @var{stream} into binary or text I/O mode.  If @var{mode} is

doc/lispref/windows.texi

@@ -383,8 +383,8 @@ as if @var{mini} were @code{nil}.
 If it doesn't find a suitable window, this function returns @code{nil}.
 @end defun
 
-The following function allows to retrieve the entire window tree of a
-frame:
+The following function allows the entire window tree of a frame to be
+retrieved:
 
 @defun window-tree &optional frame
 This function returns a list representing the window tree for frame
@@ -1476,7 +1476,7 @@ displaying a buffer only temporarily (@pxref{Temporary Displays}), and
 you want to continue working with the initial layout.
 
 The behavior can be fixed by making a new parent window when splitting
-@var{W2}.  The variable described next allows to do that.
+@var{W2}.  The variable described next allows that to be done.
 
 @defopt window-combination-limit
 This variable controls whether splitting a window shall make a new
@@ -1579,7 +1579,7 @@ combination limit of @var{W4} (the parent window of @var{W6} and
 
 Alternatively, the problems sketched above can be avoided by always
 resizing all windows in the same combination whenever one of its windows
-is split or deleted.  This also permits to split windows that would be
+is split or deleted.  This also permits spliting windows that would be
 otherwise too small for such an operation.
 
 @defopt window-combination-resize
@@ -2522,11 +2522,11 @@ windows are dedicated to another buffer (@pxref{Dedicated Windows}).
 
 @defun display-buffer-no-window buffer alist
 If @var{alist} has a non-@code{nil} @code{allow-no-window} entry, then
-this function does not display @code{buffer}.  This allows to override
-the default action and avoid displaying the buffer.  It is assumed that
-when the caller specifies a non-@code{nil} @code{allow-no-window} value
-it can handle a @code{nil} value returned from @code{display-buffer} in
-this case.
+this function does not display @code{buffer}.  This allows you to
+override the default action and avoid displaying the buffer.  It is
+assumed that when the caller specifies a non-@code{nil}
+@code{allow-no-window} value it can handle a @code{nil} value returned
+from @code{display-buffer} in this case.
 @end defun
 
 To illustrate the use of action functions, consider the following

doc/misc/dbus.texi

@@ -138,8 +138,8 @@ name could be @samp{org.gnu.Emacs.TextEditor} or
 @section D-Bus version.
 
 D-Bus has evolved over the years.  New features have been added with
-new D-Bus versions.  There are two variables, which allow to determine
-the used D-Bus version.
+new D-Bus versions.  There are two variables, which allow the determination
+of the D-Bus version used.
 
 @defvar dbus-compiled-version
 This variable, a string, determines the version of D-Bus Emacs is

doc/misc/eww.texi

@@ -162,8 +162,8 @@ You can view stored bookmarks with @kbd{B}
 @kindex S
 @cindex Multiple Buffers
   To get summary of currently opened EWW buffers, press @kbd{S}
-(@code{eww-list-buffers}).  The @file{*eww buffers*} buffer allows to
-quickly kill, flip through and switch to specific EWW buffer.
+(@code{eww-list-buffers}).  The @file{*eww buffers*} buffer allows you
+to quickly kill, flip through and switch to specific EWW buffer.
 
 @findex eww-browse-with-external-browser
 @vindex shr-external-browser

doc/misc/flymake.texi

@@ -717,7 +717,7 @@ sort error menu items, which shows error messages first.
 Flymake is also able to interpret error message patterns missing err-text-idx
 information.  This is done by merely taking the rest of the matched line
 (@code{(substring line (match-end 0))}) as error text.  This trick allows
-to make use of a huge collection of error message line patterns from
+making use of a huge collection of error message line patterns from
 @code{compile.el}.  All these error patterns are appended to
 the end of @code{flymake-err-line-patterns}.
 

doc/misc/octave-mode.texi

@@ -436,7 +436,7 @@ when Octave is waiting for input, or done sending output.
 @c You can use either 'plain' Emacs Info or the function @code{octave-help}
 @c as your Octave info reader (for @samp{help -i}).  In the former case,
 @c use @code{info_program ("info-emacs-info")}.
-@c The latter is perhaps more attractive because it allows to look up keys
+@c The latter is perhaps more attractive because it allows you to look up keys
 @c in the indices of @emph{several} info files related to Octave (provided
 @c that the Emacs variable @code{octave-help-files} is set correctly).  In
 @c this case, use @code{info_program ("info-emacs-octave-help")}.

doc/misc/org.texi

@@ -12890,9 +12890,9 @@ including DocBook.}.
 When processing a document, @samp{texinfo} back-end generates a minimal file
 header along with a title page, a copyright page, and a menu.  You control
 the latter through the structure of the document (@pxref{Headings and
-sectioning structure}).  Various keywords allow to tweak the other parts.  It
-is also possible to give directions to install the document in the @samp{Top}
-node.
+sectioning structure}).  Various keywords allow you to tweak the other parts.
+It is also possible to give directions to install the document in the
+@samp{Top} node.
 
 @subsubheading File header
 

doc/misc/reftex.texi

@@ -5421,8 +5421,8 @@ after words.  Disabled indexing in comment lines.
 New command @code{reftex-create-bibtex-file} to create a new database
 with all entries referenced in the current document.
 @item
-New keys @kbd{e} and @kbd{E} allow to produce a BibTeX database file
-from entries marked in a citation selection buffer.
+New keys @kbd{e} and @kbd{E} allow you to produce a BibTeX database
+file from entries marked in a citation selection buffer.
 @end itemize
 
 @noindent @b{Version 4.21}
@@ -5610,8 +5610,8 @@ demand.
 @item
 Index support, along with many new options.
 @item
-The selection of keys for @code{\ref} and @code{\cite} now allows to
-select multiple items by marking entries with the @kbd{m} key.
+The selection of keys for @code{\ref} and @code{\cite} now allows you
+to select multiple items by marking entries with the @kbd{m} key.
 @item
 Fancyref support.
 @end itemize

doc/misc/tramp.texi

@@ -915,8 +915,9 @@ can still access remote files using UNC file names instead of @value{tramp}:
 //melancholia/daniel$$/.emacs
 @end example
 
-UNC file name specification does not allow to specify a different user
-name for authentication like the @command{smbclient} can.
+UNC file name specification does not allow the specification of a
+different user name for authentication like the @command{smbclient}
+can.
 
 
 @item @option{adb}
@@ -2990,7 +2991,7 @@ longer open.  That is why @value{tramp} prompts for the password again
 even if there is an @command{ssh} already open.
 
 Some @command{ssh} versions support a @code{ControlPersist} option,
-which allows to set the @code{ControlPath} provided the variable
+which allows you to set the @code{ControlPath} provided the variable
 @code{tramp-ssh-controlmaster-options} is customized as follows:
 
 @lisp

doc/misc/wisent.texi

@@ -1155,8 +1155,8 @@ It defaults to the start symbol defined in the grammar
 @end table
 @end defun
 
-The following two normal hooks permit to do some useful processing
-respectively before to start parsing, and after the parser terminated.
+The following two normal hooks permit doing some useful processing
+respectively before starting parsing, and after the parser terminated.
 
 @vindex wisent-pre-parse-hook
 @defvar wisent-pre-parse-hook

etc/NEWS

@@ -87,7 +87,7 @@ and silent rules are now quieter.  To get the old behavior where
 build with 'make V=1'.
 
 ---
-** The configure option '--with-gameuser' now allows to specify a
+** The configure option '--with-gameuser' now allows you to specify a
 group instead of a user if its argument is prefixed by ':' (a colon).
 This will cause the game score files in ${localstatedir}/games/emacs
 to be owned by that group, and the helper program for updating them to
@@ -200,9 +200,9 @@ select-enable-primary is ineffective since the system doesn't
 have the equivalent of a primary selection.
 
 +++
-** New option `switch-to-buffer-in-dedicated-window' allows to customize
-how `switch-to-buffer' proceeds interactively when the selected window
-is strongly dedicated to its buffer.
+** New option `switch-to-buffer-in-dedicated-window' allows you to
+customize how `switch-to-buffer' proceeds interactively when the
+selected window is strongly dedicated to its buffer.
 
 +++
 ** The option `even-window-heights' has been renamed to
@@ -855,11 +855,12 @@ plist will contain a :peer element that has the output of
 ** Tramp
 
 +++
-*** New connection method "afp", which allows to access Mac OS X
+*** New connection method "afp", which allows you to access Mac OS X
 volumes via the Apple Filing Protocol.
 
 +++
-*** New connection method "nc", which allows to access dumb busyboxes.
+*** New connection method "nc", which allows you to access dumb
+busyboxes.
 
 +++
 *** Method-specific parameters can be overwritten now with variable
@@ -1220,7 +1221,7 @@ node "Generic Functions" in the Emacs Lisp manual for more details.
 let-bind the values stored in an alist.
 
 ---
-** `tildify-mode' allows to automatically insert hard spaces as one
+** `tildify-mode' allows automatic insertion of hard spaces as one
 types the text.  Breaking line after a single-character words is
 forbidden by Czech and Polish typography (and may be discouraged in
 other languages), so `auto-tildify-mode' makes it easier to create
@@ -1424,7 +1425,7 @@ commands other than the predefined `C-u'.
 
 +++
 ** New functions `filepos-to-bufferpos' and `bufferpos-to-filepos'.
-These allow to convert between buffer positions and the corresponding
+These allow conversion between buffer positions and the corresponding
 file byte offsets, given the file's encoding.
 
 +++
@@ -1547,14 +1548,14 @@ called interactively.
 ** New function `function-put' to use instead of `put' for function properties.
 
 +++
-** The new function `bidi-find-overridden-directionality' allows to
+** The new function `bidi-find-overridden-directionality' allows you to
 find characters whose directionality was, perhaps maliciously,
 overridden by directional override control characters.  Lisp programs
 can use this to detect potential phishing of URLs and other links that
 exploits bidirectional display reordering.
 
 +++
-** The new function `buffer-substring-with-bidi-context' allows to
+** The new function `buffer-substring-with-bidi-context' allows you to
 copy a portion of a buffer into a different location while preserving
 the visual appearance both of the copied text and the text at
 destination, even when the copied text includes mixed bidirectional
@@ -1677,7 +1678,7 @@ undocumented integer-pair format.  Instead, they return a list of two
 integers.
 
 +++
-** New function `set-binary-mode' allows to switch a standard stream
+** New function `set-binary-mode' allows switching a standard stream
 of the Emacs process to binary I/O mode.
 
 +++
@@ -1788,8 +1789,8 @@ fullwidth frames, the behavior may depend on the toolkit used.
    number of columns or lines it displays.
 
 +++
-*** New function `window-preserve-size' allows to preserve the size of
-windows without "fixing" it.  It's supported by `fit-window-to-buffer',
+*** New function `window-preserve-size' allows you to preserve the size of
+a window without "fixing" it.  It's supported by `fit-window-to-buffer',
 `temp-buffer-resize-mode' and `display-buffer'.
 
 +++

lisp/autorevert.el

@@ -664,8 +664,8 @@ This is an internal function used by Auto-Revert Mode."
                  (not (eq revert 'fast)))
         (message "Reverting buffer `%s'." (buffer-name)))
       ;; If point (or a window point) is at the end of the buffer, we
-      ;; want to keep it at the end after reverting.  This allows to
-      ;; tail a file.
+      ;; want to keep it at the end after reverting.  This allows one
+      ;; to tail a file.
       (when buffer-file-name
         (setq eob (eobp))
         (walk-windows

lisp/cedet/mode-local.el

@@ -189,7 +189,7 @@ BINDINGS is a list of (VARIABLE . VALUE).
 Optional argument PLIST is a property list each VARIABLE symbol will
 be set to.  The following properties have special meaning:
 
-- `constant-flag' if non-nil, prevent to rebind variables.
+- `constant-flag' if non-nil, prevent rebinding variables.
 - `mode-variable-flag' if non-nil, define mode variables.
 - `override-flag' if non-nil, define override functions.
 
@@ -544,7 +544,7 @@ default is to call the function `NAME-default' with the appropriate
 arguments.
 
 BODY can also include an override form that specifies which part of
-BODY is specifically overridden.  This permits to specify common code
+BODY is specifically overridden.  This permits specifying common code
 run for both default and overridden implementations.
 An override form is one of:
 

lisp/cedet/semantic/senator.el

@@ -803,7 +803,7 @@ if available."
   (setq isearch-adjusted t)
   (isearch-update))
 
-;; Recent versions of GNU Emacs allow to override the isearch search
+;; Recent versions of GNU Emacs allow overriding the isearch search
 ;; function for special needs, and avoid to advice the built-in search
 ;; function :-)
 (defun senator-isearch-search-fun ()

lisp/cedet/semantic/wisent.el

@@ -149,7 +149,7 @@ and will be collected in `semantic-lex' form: (SYMBOL START . END)."
 
 ;; Parser plug-ins
 ;;
-;; The following functions permit to plug the Wisent LALR parser in
+;; The following functions permit plugging the Wisent LALR parser in
 ;; Semantic toolkit.  They use the standard API provided by Semantic
 ;; to plug parsers in.
 ;;

lisp/dos-fns.el

@@ -98,7 +98,7 @@ sure to obey the 8.3 limitations."
 			    string))
 	      (aset string i ?_))
 	    ;; If we don't have a period in the first 8 chars, insert one.
-	    ;; This enables to have 3 more characters from the original
+	    ;; This enables having 3 more characters from the original
 	    ;; name in the extension.
 	    (if (> (or (string-match "\\." string) (length string))
 		   8)

lisp/frameset.el

@@ -354,12 +354,12 @@ Properties can be set with
 ;; Now, what about the filter alist variables? There are three of them,
 ;; though only two sets of parameters:
 ;;
-;; - `frameset-session-filter-alist' contains these filters that allow to
-;;   save and restore framesets in-session, without the need to serialize
-;;   the frameset or save it to disk (for example, to save a frameset in a
-;;   register and restore it later).  Filters in this list do not remove
-;;   live objects, except in `minibuffer', which is dealt especially by
-;;   `frameset-save' / `frameset-restore'.
+;; - `frameset-session-filter-alist' contains these filters that allow
+;;   saving and restoring framesets in-session, without the need to
+;;   serialize the frameset or save it to disk (for example, to save a
+;;   frameset in a register and restore it later).  Filters in this
+;;   list do not remove live objects, except in `minibuffer', which is
+;;   dealt especially by `frameset-save' / `frameset-restore'.
 ;;
 ;; - `frameset-persistent-filter-alist' is the whole deal.  It does all
 ;;   the filtering described above, and the result is ready to be saved on
@@ -1072,7 +1072,7 @@ FORCE-ONSCREEN can be:
 	   - a list (LEFT TOP WIDTH HEIGHT), describing the workarea.
 	   It must return non-nil to force the frame onscreen, nil otherwise.
 
-CLEANUP-FRAMES allows to \"clean up\" the frame list after restoring a frameset:
+CLEANUP-FRAMES allows \"cleaning up\" the frame list after restoring a frameset:
   t        Delete all frames that were not created or restored upon.
   nil      Keep all frames.
   FUNC     A function called with two arguments:

lisp/gnus/gnus-agent.el

@@ -680,7 +680,7 @@ minor mode in all Gnus buffers."
 
 (defun gnus-agent-queue-setup (&optional group-name)
   "Make sure the queue group exists.
-Optional arg GROUP-NAME allows to specify another group."
+Optional arg GROUP-NAME allows another group to be specified."
   (unless (gnus-gethash (format "nndraft:%s" (or group-name "queue"))
 			gnus-newsrc-hashtb)
     (gnus-request-create-group (or group-name "queue") '(nndraft ""))

lisp/gnus/mm-util.el

@@ -496,9 +496,9 @@ Unless LIST is given, `mm-codepage-ibm-list' is used."
       (windows-1257 . (mm-codepage-setup 1257 t))))
   "An alist of (CHARSET . FORM) pairs.
 If an article is encoded in an unknown CHARSET, FORM is
-evaluated.  This allows to load additional libraries providing
-charsets on demand.  If supported by your Emacs version, you
-could use `autoload-coding-system' here."
+evaluated.  This allows the loading of additional libraries
+providing charsets on demand.  If supported by your Emacs
+version, you could use `autoload-coding-system' here."
   :version "22.1" ;; Gnus 5.10.9
   :type '(list (set :inline t
 		    (const (windows-1250 . (mm-codepage-setup 1250 t)))

lisp/international/characters.el

@@ -496,7 +496,7 @@ with L, LRE, or LRO Unicode bidi character type.")
 		    table)))
 
 ;; Load uni-mirrored.el and uni-brackets.el if available, so that they
-;; get dumped into Emacs.  This allows to start Emacs with
+;; get dumped into Emacs.  This allows starting Emacs with
 ;; force-load-messages in ~/.emacs, and avoid infinite recursion in
 ;; bidi_initialize, which needs to load uni-mirrored.el and
 ;; uni-brackets.el in order to display the "Loading" messages.

lisp/ldefs-boot.el

@@ -11632,7 +11632,7 @@ FORCE-ONSCREEN can be:
 	   - a list (LEFT TOP WIDTH HEIGHT), describing the workarea.
 	   It must return non-nil to force the frame onscreen, nil otherwise.
 
-CLEANUP-FRAMES allows to \"clean up\" the frame list after restoring a frameset:
+CLEANUP-FRAMES allows \"cleaning up\" the frame list after restoring a frameset:
   t        Delete all frames that were not created or restored upon.
   nil      Keep all frames.
   FUNC     A function called with two arguments:
@@ -30613,8 +30613,8 @@ Usage:
     according to option `vhdl-argument-list-indent'.
 
       If option `vhdl-indent-tabs-mode' is nil, spaces are used instead of
-    tabs.  `\\[tabify]' and `\\[untabify]' allow to convert spaces to tabs
-    and vice versa.
+    tabs.  `\\[tabify]' and `\\[untabify]' allow the conversion of spaces to
+    tabs and vice versa.
 
       Syntax-based indentation can be very slow in large files.  Option
     `vhdl-indent-syntax-based' allows you to use faster but simpler indentation.

lisp/mail/mailclient.el

@@ -22,7 +22,7 @@
 
 ;;; Commentary:
 
-;; This package allows to hand over a buffer to be sent off
+;; This package allows handing over a buffer to be sent off
 ;; via the system's designated e-mail client.
 ;; Note that the e-mail client will display the contents of the buffer
 ;; again for editing.

lisp/man.el

@@ -75,7 +75,7 @@
 ;; ============= TODO ===========
 ;; - Add a command for printing.
 ;; - The awk script deletes multiple blank lines.  This behavior does
-;;   not allow to understand if there was indeed a blank line at the
+;;   not allow one to understand if there was indeed a blank line at the
 ;;   end or beginning of a page (after the header, or before the
 ;;   footer).  A different algorithm should be used.  It is easy to
 ;;   compute how many blank lines there are before and after the page

lisp/mh-e/mh-search.el

@@ -1262,7 +1262,7 @@ is used to search."
     (forward-line)))
 
 ;; All implementations of pick have special options -cc, -date, -from and
-;; -subject that allow to search for corresponding components. Any other
+;; -subject that allow searching for corresponding components. Any other
 ;; component is searched using option --COMPNAME, for example: `pick
 ;; --x-mailer mh-e'. Mailutils "pick" supports this option using a certain
 ;; kludge, but it prefers the following syntax for this purpose:

lisp/net/tramp-cmds.el

@@ -209,7 +209,7 @@ Before reproducing the bug, you might apply
 
   M-x tramp-cleanup-all-connections
 
-This allows to investigate from a clean environment.  Another
+This allows us to investigate from a clean environment.  Another
 useful thing to do is to put
 
   (setq tramp-verbose 9)

lisp/net/tramp-gvfs.el

@@ -86,7 +86,7 @@
 
 ;; Restrictions:
 
-;; * The current GVFS implementation does not allow to write on the
+;; * The current GVFS implementation does not allow writing on the
 ;;   remote bluetooth device via OBEX.
 ;;
 ;; * Two shares of the same SMB server cannot be mounted in parallel.

lisp/org/org-crypt.el

@@ -225,7 +225,7 @@ See `org-crypt-disable-auto-save'."
 	    ;; outline property starts at the \n of the heading.
 	    (delete-region (1- (point)) end)
 	    ;; Store a checksum of the decrypted and the encrypted
-	    ;; text value.  This allow to reuse the same encrypted text
+	    ;; text value.  This allow reusing the same encrypted text
 	    ;; if the text does not change, and therefore avoid a
 	    ;; re-encryption process.
 	    (insert "\n" (propertize decrypted-text

lisp/org/org-element.el

@@ -367,8 +367,8 @@ still has an entry since one of its properties (`:title') does.")
 ;; Provide four accessors: `org-element-type', `org-element-property'
 ;; `org-element-contents' and `org-element-restriction'.
 ;;
-;; Setter functions allow to modify elements by side effect.  There is
-;; `org-element-put-property', `org-element-set-contents',
+;; Setter functions allow modification of elements by side effect.
+;; There is `org-element-put-property', `org-element-set-contents',
 ;; `org-element-set-element' and `org-element-adopt-element'.  Note
 ;; that `org-element-set-element' and `org-element-adopt-elements' are
 ;; higher level functions since also update `:parent' property.
@@ -4023,8 +4023,8 @@ position of point and CDR is nil."
 ;; `org-element-parse-secondary-string', which parses objects within
 ;; a given string.
 ;;
-;; The (almost) almighty `org-element-map' allows to apply a function
-;; on elements or objects matching some type, and accumulate the
+;; The (almost) almighty `org-element-map' allows applying a function
+;; on elements or objects matching some type, and accumulating the
 ;; resulting values.  In an export situation, it also skips unneeded
 ;; parts of the parse tree.
 

lisp/org/org-feed.el

@@ -24,7 +24,7 @@
 ;;
 ;;; Commentary:
 ;;
-;;  This module allows to create and change entries in an Org-mode
+;;  This module allows entries to be created and changed in an Org-mode
 ;;  file triggered by items in an RSS feed.  The basic functionality is
 ;;  geared toward simply adding new items found in a feed as outline nodes
 ;;  to an Org file.  Using hooks, arbitrary actions can be triggered for

lisp/org/org.el

@@ -2254,7 +2254,7 @@ fast, while still showing the whole path to the entry."
   :type 'boolean)
 
 (defcustom org-refile-allow-creating-parent-nodes nil
-  "Non-nil means allow to create new nodes as refile targets.
+  "Non-nil means allow the creation of new nodes as refile targets.
 New nodes are then created by adding \"/new node name\" to the completion
 of an existing node.  When the value of this variable is `confirm',
 new node creation must be confirmed by the user (recommended).

lisp/org/ox-ascii.el

@@ -35,10 +35,10 @@
 
 ;;; Define Back-End
 ;;
-;; The following setting won't allow to modify preferred charset
+;; The following setting won't allow modifying preferred charset
 ;; through a buffer keyword or an option item, but, since the property
-;; will appear in communication channel nonetheless, it allows to
-;; override `org-ascii-charset' variable on the fly by the ext-plist
+;; will appear in communication channel nonetheless, it allows
+;; overriding `org-ascii-charset' variable on the fly by the ext-plist
 ;; mechanism.
 ;;
 ;; We also install a filter for headlines and sections, in order to

lisp/org/ox-icalendar.el

@@ -76,7 +76,7 @@ for timed events.  If non-zero, alarms are created.
 
 (defcustom org-icalendar-exclude-tags nil
   "Tags that exclude a tree from export.
-This variable allows to specify different exclude tags from other
+This variable allows specifying different exclude tags from other
 back-ends.  It can also be set with the ICAL_EXCLUDE_TAGS
 keyword."
   :group 'org-export-icalendar

lisp/org/ox-publish.el

@@ -1078,7 +1078,7 @@ publishing directory."
   "Return numbering for headline matching FUZZY search in FILE.
 
 Return value is a list of numbers, or nil.  This function allows
-to resolve external fuzzy links like:
+the resolution of external fuzzy links like:
 
   [[file.org::*fuzzy][description]]"
   (when org-publish-cache

lisp/org/ox.el

@@ -775,7 +775,7 @@ is nil.  You can also allow them through local buffer variables."
 (defcustom org-export-snippet-translation-alist nil
   "Alist between export snippets back-ends and exporter back-ends.
 
-This variable allows to provide shortcuts for export snippets.
+This variable allows providing shortcuts for export snippets.
 
 For example, with a value of \((\"h\" . \"html\")), the
 HTML back-end will recognize the contents of \"@@h:<b>@@\" as
@@ -849,7 +849,7 @@ output is restricted to body only, \"s\" when it is restricted to
 the current subtree, \"v\" when only visible elements are
 considered for export, \"f\" when publishing functions should be
 passed the FORCE argument and \"a\" when the export should be
-asynchronous).  Also, [?] allows to switch back to standard
+asynchronous).  Also, [?] allows switching back to standard
 mode."
   :group 'org-export-general
   :version "24.4"
@@ -3657,9 +3657,9 @@ INFO is the plist used as a communication channel."
 ;; `org-export-get-relative-level' is a shortcut to get headline
 ;; level, relatively to the lower headline level in the parsed tree.
 ;;
-;; `org-export-get-headline-number' returns the section number of an
-;; headline, while `org-export-number-to-roman' allows to convert it
-;; to roman numbers.
+;; `org-export-get-headline-number' returns the section number of a
+;; headline, while `org-export-number-to-roman' allows it to be
+;; converted to roman numbers.
 ;;
 ;; `org-export-low-level-p', `org-export-first-sibling-p' and
 ;; `org-export-last-sibling-p' are three useful predicates when it
@@ -4093,8 +4093,8 @@ Otherwise, only provided element's type is considered.
 Optional argument PREDICATE is a function returning a non-nil
 value if the current element or object should be counted in.  It
 accepts two arguments: the element or object being considered and
-the plist used as a communication channel.  This allows to count
-only a certain type of objects (i.e. inline images).
+the plist used as a communication channel.  This allows counting
+only a certain type of object (i.e. inline images).
 
 Return value is a list of numbers if ELEMENT is a headline or an
 item.  It is nil for keywords.  It represents the footnote number
@@ -5458,7 +5458,7 @@ to `:default' encoding. If it fails, return S."
 ;; returned results in the current process.
 ;;
 ;; At a higher level, `org-export-to-buffer' and `org-export-to-file'
-;; allow to export to a buffer or a file, asynchronously or not.
+;; allow exporting to a buffer or a file, asynchronously or not.
 ;;
 ;; `org-export-output-file-name' is an auxiliary function meant to be
 ;; used with `org-export-to-file'.  With a given extension, it tries
@@ -5985,7 +5985,7 @@ is nil when this menu hasn't been selected yet.
 
 EXPERTP, when non-nil, triggers expert UI.  In that case, no help
 buffer is provided, but indications about currently active
-options are given in the prompt.  Moreover, [?] allows to switch
+options are given in the prompt.  Moreover, [?] allows switching
 back to standard interface."
   (let* ((fontify-key
 	  (lambda (key &optional access-key)

lisp/play/gamegrid.el

@@ -379,7 +379,7 @@ static unsigned char gamegrid_bits[] = {
     (dotimes (i height)
       (insert line))
     ;; Adjust the height of the default face to the height of the
-    ;; images. Unlike XEmacs, Emacs doesn't allow to make the default
+    ;; images. Unlike XEmacs, Emacs doesn't allow making the default
     ;; face buffer-local; so we do this with an overlay.
     (when (eq gamegrid-display-mode 'glyph)
       (overlay-put (make-overlay (point-min) (point-max))

lisp/play/gomoku.el

@@ -551,7 +551,7 @@ that DVAL has been added on SQUARE."
 ;;;
 
 ;; Several variables are used to monitor a game, including a GAME-HISTORY (the
-;; list of all (SQUARE . PREVSCORE) played) that allows to take moves back
+;; list of all (SQUARE . PREVSCORE) played) that allows you to take moves back
 ;; (anti-updating the score table) and to compute the table from scratch in
 ;; case of an interruption.
 

lisp/progmodes/antlr-mode.el

@@ -537,8 +537,8 @@ corresponding kind, i.e., looks like \(OPTION-DEF...).
 Each OPTION-DEF looks like \(OPTION-NAME EXTRA-FN VALUE-SPEC...) which
 defines a file/grammar/rule/subrule option with name OPTION-NAME.  The
 OPTION-NAMEs are used for the creation of the \"Insert XXX Option\"
-submenus, see `antlr-options-use-submenus', and to allow to insert the
-option name with completion when using \\[antlr-insert-option].
+submenus, see `antlr-options-use-submenus', and to allow the insersion
+of the option name with completion when using \\[antlr-insert-option].
 
 If EXTRA-FN is a function, it is called at different phases of the
 insertion with arguments \(PHASE OPTION-NAME).  PHASE can have the

lisp/progmodes/python.el

@@ -2737,7 +2737,7 @@ killed."
                  (process (get-buffer-process buffer))
                  ;; Users can override the interpreter and args
                  ;; interactively when calling `run-python', let-binding
-                 ;; these allows to have the new right values in all
+                 ;; these allows having the new right values in all
                  ;; setup code that is done in `inferior-python-mode',
                  ;; which is important, especially for prompt detection.
                  (python-shell--interpreter interpreter)
@@ -3351,7 +3351,7 @@ def __PYTHON_EL_native_completion_setup():
                 if not completion:
                     if self.last_completion != '1__dummy_completion__':
                         # When no more completions are available, returning a
-                        # dummy with non-sharing prefix allow to ensure output
+                        # dummy with non-sharing prefix allow ensuring output
                         # while preventing changes to current input.
                         # Coincidentally it's also the end of output.
                         completion = '1__dummy_completion__'

lisp/progmodes/vhdl-mode.el

@@ -4422,8 +4422,8 @@ Usage:
     according to option `vhdl-argument-list-indent'.
 
       If option `vhdl-indent-tabs-mode' is nil, spaces are used instead of
-    tabs.  `\\[tabify]' and `\\[untabify]' allow to convert spaces to tabs
-    and vice versa.
+    tabs.  `\\[tabify]' and `\\[untabify]' allow the conversion of spaces to
+    tabs and vice versa.
 
       Syntax-based indentation can be very slow in large files.  Option
     `vhdl-indent-syntax-based' allows you to use faster but simpler indentation.

lisp/strokes.el

@@ -858,7 +858,7 @@ The command will be executed provided one exists for that stroke,
 based on the variable `strokes-minimum-match-score'.
 If no stroke matches, nothing is done and return value is nil."
   ;; FIXME: Undocument return value.  It is not documented for all cases,
-  ;; and doesn't allow to difference between no stroke matches and
+  ;; and doesn't allow differentiating between no stroke matches and
   ;; command-execute returning nil, anyway.
   (let* ((match (strokes-match-stroke stroke strokes-global-map))
 	 (command (car match))

lisp/textmodes/ispell.el

@@ -1979,7 +1979,7 @@ and pass it the output of the last Ispell invocation."
 
 (defun ispell-send-replacement (misspelled replacement)
   "Notify Aspell that MISSPELLED should be spelled REPLACEMENT.
-This allows to improve the suggestion list based on actual misspellings."
+This allows improving the suggestion list based on actual misspellings."
   (and ispell-really-aspell
        (ispell-send-string (concat "$$ra " misspelled "," replacement "\n"))))
 

lisp/tree-widget.el

@@ -664,7 +664,7 @@ This hook should be local in the buffer setup to display widgets.")
          (flags  (widget-get tree :tree-widget--guide-flags))
          (indent (widget-get tree :indent))
          ;; Setup widget's image support.  Looking up for images, and
-         ;; setting widgets' :tag-glyph is done here, to allow to
+         ;; setting widgets' :tag-glyph is done here, to allow us to
          ;; dynamically change the image theme.
          (widget-image-enable (tree-widget-use-image-p))     ; Emacs
          (widget-glyph-enable widget-image-enable)           ; XEmacs

lisp/vc/pcvs.el

@@ -58,8 +58,8 @@
 ;; ******** FIX THE DOCUMENTATION *********
 ;;
 ;; - rework the displaying of error messages.
-;; - allow to flush messages only
-;; - allow to protect files like ChangeLog from flushing
+;; - allow the flushing of messages only
+;; - allow the protection of files like ChangeLog from flushing
 ;; - query the user for cvs-get-marked (for some cmds or if nothing's selected)
 ;; - don't return the first (resp last) FI if the cursor is before
 ;;   (resp after) it.

lisp/window.el

@@ -2005,7 +2005,7 @@ SIDE can be any of the symbols `left', `top', `right' or
 
 ;; Predecessors to the below have been devised by Julian Assange in
 ;; change-windows-intuitively.el and Hovav Shacham in windmove.el.
-;; Neither of these allow to selectively ignore specific windows
+;; Neither of these allow one to selectively ignore specific windows
 ;; (windows whose `no-other-window' parameter is non-nil) as targets of
 ;; the movement.
 (defun window-in-direction (direction &optional window ignore sign wrap mini)

src/lisp.h

@@ -2090,7 +2090,7 @@ struct Lisp_Marker
   /* For markers that point somewhere,
      this is used to chain of all the markers in a given buffer.  */
   /* We could remove it and use an array in buffer_text instead.
-     That would also allow to preserve it ordered.  */
+     That would also allow us to preserve it ordered.  */
   struct Lisp_Marker *next;
   /* This is the char position where the marker points.  */
   ptrdiff_t charpos;

src/w32.c

@@ -95,7 +95,7 @@ typedef struct _MEMORY_STATUS_EX {
 } MEMORY_STATUS_EX,*LPMEMORY_STATUS_EX;
 
 /* These are here so that GDB would know about these data types.  This
-   allows to attach GDB to Emacs when a fatal exception is triggered
+   allows attaching GDB to Emacs when a fatal exception is triggered
    and Windows pops up the "application needs to be closed" dialog.
    At that point, _gnu_exception_handler, the top-level exception
    handler installed by the MinGW startup code, is somewhere on the

src/w32heap.c

@@ -100,8 +100,8 @@ typedef struct _RTL_HEAP_PARAMETERS {
    special segment to the executable.  In order to be able to do this
    without losing too much space, we need to create a Windows heap at
    the specific address of the static array.  The RtlCreateHeap
-   available inside the NT kernel since XP will do this.  It allows to
-   create a non-growable heap at a specific address.  So before
+   available inside the NT kernel since XP will do this.  It allows the
+   creation of a non-growable heap at a specific address.  So before
    dumping, we create a non-growable heap at the address of the
    dumped_data[] array.  After dumping, we reuse memory allocated
    there without being able to free it (but most of it is not meant to

src/w32term.c

@@ -3616,8 +3616,8 @@ w32_set_horizontal_scroll_bar_thumb (struct scroll_bar *bar,
   si.fMask = SIF_PAGE | SIF_POS | SIF_RANGE;
   si.nMin = 0;
   si.nMax = whole;
-  /* Allow nPage to be one larger than nPos so we don't allow to scroll
-     an already fully visible buffer.  */
+  /* Allow nPage to be one larger than nPos so we don't allow the scrolling
+     of an already fully visible buffer.  */
   si.nPage = min (portion, si.nMax) + 1;
   si.nPos = min (position, si.nMax);
   SetScrollInfo (w, SB_CTL, &si, TRUE);

src/window.c

@@ -7263,7 +7263,7 @@ resizing a window preferably resizes one adjacent window only.
 
 If this variable is t, splitting a window tries to get the space
 proportionally from all windows in the same combination.  This also
-allows to split a window that is otherwise too small or of fixed size.
+allows splitting a window that is otherwise too small or of fixed size.
 Resizing and deleting a window proportionally resize all windows in the
 same combination.
 

src/xfaces.c

@@ -80,7 +80,7 @@ along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.  */
    specs overwrite the font-spec in the 14th attribute.
 
 
-   Faces are frame-local by nature because Emacs allows to define the
+   Faces are frame-local by nature because Emacs allows you to define the
    same named face (face names are symbols) differently for different
    frames.  Each frame has an alist of face definitions for all named
    faces.  The value of a named face in such an alist is a Lisp vector