Most of this change is to boilerplate commentary such as license URLs.
This change was prompted by ftp://ftp.gnu.org's going-away party,
planned for November. Change these FTP URLs to https://ftp.gnu.org
instead. Make similar changes for URLs to other organizations moving
away from FTP. Also, change HTTP to HTTPS for URLs to gnu.org and
fsf.org when this works, as this will further help defend against
man-in-the-middle attacks (for this part I omitted the MS-DOS and
MS-Windows sources and the test tarballs to keep the workload down).
HTTPS is not fully working to lists.gnu.org so I left those URLs alone
for now.
The PDF versions of the GNU manuals used curved single quotes to
represent grave accent and apostrophe, which made it a pain to cut
and paste code examples from them. Fix the PDF versions to use
grave accent and apostrophe for Lisp source code, keystrokes, etc.
This change does not affect the info files, nor does it affect
ordinary uses of curved single quotes in PDF.
* doc/emacs/docstyle.texi: New file, which specifies treatment for
grave accent and apostrophe, as well as the document encoding.
* doc/emacs/emacs-xtra.texi, doc/emacs/emacs.texi:
* doc/lispintro/emacs-lisp-intro.texi:
* doc/lispref/back.texi, doc/lispref/book-spine.texi:
* doc/lispref/elisp.texi, doc/lispref/lay-flat.texi:
* doc/misc/ada-mode.texi, doc/misc/auth.texi:
* doc/misc/autotype.texi, doc/misc/bovine.texi, doc/misc/calc.texi:
* doc/misc/cc-mode.texi, doc/misc/cl.texi, doc/misc/dbus.texi:
* doc/misc/dired-x.texi, doc/misc/ebrowse.texi, doc/misc/ede.texi:
* doc/misc/ediff.texi, doc/misc/edt.texi, doc/misc/efaq-w32.texi:
* doc/misc/efaq.texi, doc/misc/eieio.texi, doc/misc/emacs-gnutls.texi:
* doc/misc/emacs-mime.texi, doc/misc/epa.texi, doc/misc/erc.texi:
* doc/misc/ert.texi, doc/misc/eshell.texi, doc/misc/eudc.texi:
* doc/misc/eww.texi, doc/misc/flymake.texi, doc/misc/forms.texi:
* doc/misc/gnus-coding.texi, doc/misc/gnus-faq.texi:
* doc/misc/gnus.texi, doc/misc/htmlfontify.texi:
* doc/misc/idlwave.texi, doc/misc/ido.texi, doc/misc/info.texi:
* doc/misc/mairix-el.texi, doc/misc/message.texi, doc/misc/mh-e.texi:
* doc/misc/newsticker.texi, doc/misc/nxml-mode.texi:
* doc/misc/octave-mode.texi, doc/misc/org.texi, doc/misc/pcl-cvs.texi:
* doc/misc/pgg.texi, doc/misc/rcirc.texi, doc/misc/reftex.texi:
* doc/misc/remember.texi, doc/misc/sasl.texi, doc/misc/sc.texi:
* doc/misc/semantic.texi, doc/misc/ses.texi, doc/misc/sieve.texi:
* doc/misc/smtpmail.texi, doc/misc/speedbar.texi:
* doc/misc/srecode.texi, doc/misc/todo-mode.texi, doc/misc/tramp.texi:
* doc/misc/url.texi, doc/misc/vhdl-mode.texi, doc/misc/vip.texi:
* doc/misc/viper.texi, doc/misc/widget.texi, doc/misc/wisent.texi:
* doc/misc/woman.texi:
Use it instead of '@documentencoding UTF-8', to lessen the need for
global changes like this in the future.
* doc/emacs/Makefile.in (EMACS_XTRA):
* doc/lispintro/Makefile.in (srcs):
* doc/lispref/Makefile.in (srcs):
Add dependency on docstyle.texi.
* doc/misc/Makefile.in (style): New macro.
(${buildinfodir}/%.info, %.dvi, %.pdf, %.html)
(${buildinfodir}/ccmode.info, ${buildinfodir}/efaq%.info, gnus_deps):
Use it.
[doc/emacs/ChangeLog]
Less 'make' chatter for Emacs doc
* Makefile.in (AM_DEFAULT_VERBOSITY, AM_V_GEN, am__v_GEN_)
(am__v_GEN_0, am__v_GEN_1): New macros, from ../../src/Makefile.in.
(ENVADD, $(buildinfodir)/emacs.info, emacs.html):
Use them.
[doc/lispintro/ChangeLog]
Less 'make' chatter for Emacs doc
* Makefile.in (AM_DEFAULT_VERBOSITY, AM_V_GEN, am__v_GEN_)
(am__v_GEN_0, am__v_GEN_1): New macros, from ../../src/Makefile.in.
(ENVADD, $(buildinfodir)/eintr.info, emacs-lisp-intro.html):
Use them.
[doc/lispref/ChangeLog]
Less 'make' chatter for Emacs doc
* Makefile.in (AM_DEFAULT_VERBOSITY, AM_V_GEN, am__v_GEN_)
(am__v_GEN_0, am__v_GEN_1): New macros, from ../../src/Makefile.in.
(ENVADD, $(buildinfodir)/elisp.info, elisp.html):
Use them.
[doc/misc/ChangeLog]
Less 'make' chatter for Emacs doc
* Makefile.in (AM_DEFAULT_VERBOSITY, AM_V_GEN, am__v_GEN_)
(am__v_GEN_0, am__v_GEN_1): New macros, from ../../src/Makefile.in.
(ENVADD, $(buildinfodir)/%.info, %.html, ${buildinfodir}/ccmode.info)
(${buildinfodir}/efaq%.info, efaq%.html):
Use them.
[lisp/ChangeLog]
Less 'make' chatter in lisp directory
* Makefile.in (AM_DEFAULT_VERBOSITY, AM_V_GEN, am__v_GEN_)
(am__v_GEN_0, am__v_GEN_1): New macros, from ../src/Makefile.in.
(custom-deps, finder-data, autoloads, update-subdirs): Use them.
* emacs/Makefile.in (mkinfodir): Remove.
(.dvi.ps): Replace with pattern rule.
(${buildinfodir}): New rule.
($(buildinfodir)/emacs.info): Use order-only prereq for output dir. Use $<.
(emacs.dvi, emacs.pdf, emacs.html, emacs-xtra.dvi, emacs-xtra.pdf): Use $<.
(%.ps): New rule.
* lispintro/Makefile.in (mkinfodir): Remove.
(.dvi.ps): Replace with explicit rule.
(${buildinfodir}): New rule.
(${buildinfodir}/eintr.info): Use order-only prereq for output dir. Use $<.
(emacs-lisp-intro.dvi, emacs-lisp-intro.pdf, emacs-lisp-intro.html): Use $<.
(emacs-lisp-intro.ps): New rule.
* lispref/Makefile.in (mkinfodir): Remove.
(.dvi.ps): Replace with explicit rule.
(html): Declare as PHONY.
(${buildinfodir}): New rule.
($(buildinfodir)/elisp.info): Use order-only prereq for output dir. Use $<.
(elisp.dvi, elisp.html, elisp.pdf): Use $<.
(elisp.ps): New rule.
It's never been anything more than pointless complexity
* configure.ac (INFO_EXT, INFO_OPTS): Remove output variables.
* Makefile.in (INFO_EXT): Remove and replace by ".info" throughout.
* doc/emacs/Makefile.in (INFO_EXT): Remove and replace by ".info" throughout.
(INFO_OPTS): Set directly rather than with configure.
* doc/lispintro/Makefile.in (INFO_EXT): Remove and replace by ".info" throughout.
(INFO_OPTS): Set directly rather than with configure.
* doc/lispref/Makefile.in (INFO_EXT): Remove and replace by ".info" throughout.
(INFO_OPTS): Set directly rather than with configure.
* doc/misc/Makefile.in (INFO_EXT): Remove and replace by ".info" throughout.
(INFO_OPTS): Set directly rather than with configure.
* doc/emacs/Makefile.in (infoclean):
* doc/lispintro/Makefile.in (infoclean):
* doc/lispref/Makefile.in (infoclean):
* doc/misc/Makefile.in (infoclean):
Do not fail merely because the info directory does not exist,
but do fail if it exists and can't be cleaned.
* doc/emacs/Makefile.in (dist):
* doc/lispintro/Makefile.in (dist):
* doc/lispref/Makefile.in (dist): Edit more configure variables.
Try to check that we do not miss any in future.
Fixes: debbugs:14660
* doc/lispintro/Makefile.in (emacsdir): New variable..
(MAKEINFO_OPTS, ENVADD): Add $emacsdir.
(srcs): Add emacsver.texi.
(dist): Include emacsver.texi. Edit emacsdir.
* doc/lispintro/emacs-lisp-intro.texi (emacsver.texi): Include it.
(copying): For non-printed versions, uses Emacs version rather
than that of the printed book.
(Complications, Lisp macro, defvar and asterisk, defcustom): Copyedits.
* doc/lispintro/makefile.w32-in (emacsdir): New variable.
(INFO_SOURCES): Add emacsver.texi.
(ENVADD): Add $emacsdir (and $texinfodir).
* doc/lispintro/Makefile.in (srcs): New variable, adding doclicense.texi.
(${buildinfodir}/eintr$(INFO_EXT), emacs-lisp-intro.dvi)
(emacs-lisp-intro.pdf, emacs-lisp-intro.html):
Use $srcs for dependencies.
* configure.in (AC_PROG_MKDIR_P): Call it, to set MKDIR_P.
(MKDEPDIR): Use $MKDIR_P.
* Makefile.in (MKDIR_P): New, set by configure.
(mkdir): Use $MKDIR_P.
* doc/emacs/Makefile.in (MKDIR_P): New, set by configure.
(mkinfodir): Use $MKDIR_P.
* doc/lispintro/Makefile.in (MKDIR_P): New, set by configure.
(mkinfodir): Use $MKDIR_P.
* doc/lispref/Makefile.in (MKDIR_P): New, set by configure.
(mkinfodir): Use $MKDIR_P.
* doc/misc/Makefile.in (MKDIR_P): New, set by configure.
(mkinfodir): Use $MKDIR_P.
* src/Makefile.in (MKDIR_P): New, set by configure.
* src/ns.mk (${ns_appdir}, ${ns_appbindir}Emacs): Use $MKDIR_P.
Ref http://lists.gnu.org/archive/html/emacs-devel/2012-04/msg00354.html
* configure.in (INFO_EXT, INFO_OPTS): New output variables.
* doc/emacs/Makefile.in (INFO_EXT, INFO_OPTS): New, set by configure.
(info, infoclean): Use $INFO_EXT.
($(infodir)/emacs$(INFO_EXT)): Use $INFO_EXT and $INFO_OPT.
* doc/emacs/makefile.w32-in (INFO_EXT, INFO_OPTS): New.
(INFO_TARGETS): Use $INFO_EXT.
($(infodir)/emacs$(INFO_EXT)): Use $INFO_EXT and $INFO_OPT, and -o.
* doc/lispintro/Makefile.in (INFO_EXT, INFO_OPTS): New, set by configure.
(info, infoclean): Use $INFO_EXT.
(${infodir}/eintr$(INFO_EXT)): Use $INFO_EXT and $INFO_OPT.
* doc/lispintro/makefile.w32-in (INFO_EXT, INFO_OPTS): New.
(INFO_TARGETS, clean): Use $INFO_EXT.
($(infodir)/eintr$(INFO_EXT)): Use $INFO_EXT and $INFO_OPT.
* doc/lispref/Makefile.in (INFO_EXT, INFO_OPTS): New, set by configure.
(info, infoclean): Use $INFO_EXT.
($(infodir)/elisp$(INFO_EXT)): Use $INFO_EXT and $INFO_OPT.
* doc/lispref/makefile.w32-in (INFO_EXT, INFO_OPTS): New.
(info, maintainer-clean): Use $INFO_EXT.
($(infodir)/elisp$(INFO_EXT)): Use $INFO_EXT and $INFO_OPT.
* doc/misc/Makefile.in (INFO_EXT, INFO_OPTS): New, set by configure.
(INFO_TARGETS): Use $INFO_EXT.
Make all rules generating info files use $INFO_EXT, $INFO_OPT, and -o.
* doc/misc/makefile.w32-in (INFO_EXT, INFO_OPTS): New.
(INFO_TARGETS): Use $INFO_EXT.
Make all rules generating info files use $INFO_EXT, $INFO_OPT, and -o.
* Makefile.in (MAKEINFO): Now controlled by `configure'.
(MAKEINFO_OPTS): New variable. Use it where appropriate.
(ENVADD): New variable to control texi2dvi and texi2pdf.
